Welcome back.
Type: Posts; User: elk hunter
Forum: Case Forming / Re-forming
I recently loaded some cast rounds for my 9.3x74 double, using Norma brass, and the action didn't want to close. I thought the bullets were probably not seated deep enough. I checked and found that...
Forum: Swappin & Sellin
I'm still looking for anything 44-77 as the add states.
Forum: Black Powder Cartridge
I made a lube/sizing die today that size the 405 bullets from .411 to .4095. That should be .001 over groove diameter. I'm going to try the .411 diameter to see if they chamber and shoot decently. No...
Forum: Black Powder Cartridge
John;
The 1 in 21" did seem odd so I measured it twice.
I have a bullet that measures 1.085 long and .408 diameter taken from an original 40-70 round of unknown manufacture. I slugged the bore...
Forum: Our Town
Great story. Great memories. Makes me think of my grand parents.
Forum: Black Powder Cartridge
1 in 21" according to my cleaning rod.
Forum: Black Powder Cartridge
Anybody have a favorite bullet and load for the Sharps 40-70 bottle neck?
My Winchester 43 Hornet is sensitive to primer changes. It prefers Federal small rifle over any other.
Forum: Single Shot Guns
The 50-45-400 was for a US Navy rolling block carbine introduced just after the Civil War. The carbines were sold off before 1871. Many of them were rebarrelled and sold to the French for use in the...
Forum: Cast Boolits
Old powder that is deteriorating can spontaneously combust so be careful.
Forum: Hunting with CB's
That was at least 30 years ago and as I recall the bullet was straight clip on wheel weight metal. The buck was very close and at the shot the shoulder dropped and the buck went maybe 20 yards and...
Forum: Hunting with CB's
I had a 400 grain 45-70 bullet, cast from wheel weight, break up when it struck the upper front leg bone on a big Mule Deer buck at about 25 yards. It probably was going 1300 FPS. The wife and I have...
Forum: Shot Guns
Of all the modern US factory shotshells high or low brass, with the exception of RST, I don't know of any truly low pressure loads. Modern powders for shotshells need to be loaded to higher pressures...
Forum: Smokeless Paper Patching
First off welcome back.
If I were to hunt with a 9.3 and cast bullets I would prefer a bullet with a large meplat as I've seen what a blunt nose cast bullet can do to big animals. I would also...
Forum: Black Powder Cartridge
I'm seriously considering building a 44-77 and am wondering about the barrel dimensions i.e. bore and groove diameters. And what barrel maker makes such.
Forum: Swappin & Sellin
I'm still looking. I really do need at least one 44-77 case for measurements. Prefer it to be the Shiloh version but will take any type. It can be an old split case.
Forum: Swappin & Sellin
I'm looking at least one Shiloh style 44-77 brass case so I can take measurements. It could even be cracked. Of course I'd take more if someone has some good ones to sell. I could use a set of dies...
Forum: Black Powder Cartridge
I have a 95 in 405 and enough brass and bullets to last me a while. I recently heard of an original Sharps Business rifle in 40-? caliber for sale locally. I'm trying to run that down and if I do...
Forum: Black Powder Cartridge
As usual I tried and no results for the search.
Forum: Muzzleloading.
If you're going to shim, and there is enough gap, you may want to try a piece of plastic shotshell case. Doesn't absorb water and swell up or rust your barrel.
Forum: Our Town
Is winter over? Not where I live. I ran the snow-blower yesterday due to 4" of overnight snow. Hasn't been a bad winter, we've only had about two feet of snow so far. We could use some more but I'm...
Forum: Black Powder Cartridge
I thought I might turn a base section out of brass or possibly steel and insert a 300 Win mag case from the rear, loctite it in and fire form. The base would be reusable if the mag case split. Might...
Forum: Black Powder Cartridge
I'm still considering building a 44-77 but am concerned about availability of brass. Anyone here shooting one? If so where did you get brass or what did you make it from. I understand that it's...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |