Search:

I have 60 new Winchester

The load I use for SASS in my 32-20 hand guns is 3.3 gr. of 231 or HP38 which gives a velocity in the 900 fps area.

For my Rossi 45 colt I load a 255 grain bullet over 6.2 grains of 231 or HP38 and have no problems with blow back and my brass is not sooty.

TGM

You can get most of them in a bucket. Others don't always fall thru to the bucket.

I have a Lyman 311008 mold that could be yours for $ 65 shipped, also have mold handle for $20 that could be included for $85 total

I figured out my problem, just old age not adjusting the press properly

The primers measured the same as Fed LPP

I purchased 1000 Win LP primers and prepared to load a batch of 45 Colt on my Dillon 550 the primer would not seat all the way into the case. They were packaged in the new style red white and black...

If you are still needing a mold, I have a Lyman 457191 that I don't need any more. Asking $65 shipped and if you need handles add $20.

Contact RCBS to see if they have something available Several years ago I needed the large primer holder and they sent me one.

TGM

speedyr I have a Lyman 311008 2 cav mold you can buy from me. Is $75 shipped OK for price.

TGM

I have a six cavity version of that mold the .358 158 gr. I got it in a swap years ago and have never cast with it. It is in like new condition. If you are interested PM me.

TGM

I shoot 32-20 guns for SASS, hand guns and rifle .The rifle being a 1873 clone. I load 3.3 or 3.4 grains 231 or HP-38 with 115 gr. .313 sized bullet. Nice easy shooting load.
TGM

There is one for sale on the SASS website classifieds along with 75 Magtech brass shells

The Lyman Cast Bullet Handbook lists loads for the 375248 bullets, using different powders which are Red Dot 6.0 to 8.5 gr., 700X 6.0 to 8.5 gr, Green Dot 6.5 to 9.0 Gr., PB 6.5 to 9.5 Gr, and Unique...

Your Hornady set is most likely a set that was for the 32-20 Contender which used a .308 bullet. I use an older set of RCBS dies to load my 32-20 ammo which work just great.

TGM

Rim Rock Bullets may have what you are looking for. They make a selection of soft cast bullets for Cowboy Action Shooting.

TGM

I have a RCBS 45-225 CAV mold It is a 225 gr. mold. I used it for my 45 colt handguns for cowboy action shooting. The mold and the #552 top punch can be yours for $95 shipped.

TGM

I have a single cavity Ideal 3118 mold I no longer need. If interested make me an offer.

I have a Lee .379 250 gr mold. It is an extra one I have new in the box. What will you give for it. I don't need any brass.

Two Gun Montana

Some help on making brass for the .40-65 Ballard Everlasting. In the Handloaders Manual of Cartridge Conversion, it says to make from .45 basic, trim case to 2.4". Anneal and form in form die.

TGM

You should not compress triple 7 as you would a black powder load. You would measure by volume the same as for black. You can check the Hodgdon web site for load info.

TGM

btt

reddhawkk they are yours.

RCBS 45-225 Cav. Double cav. and #552 top punch. It cast at 230Gr. with my soft alloy. $70 shipped

Lyman 378674 single cav., 335 Gr. W/#2 alloy & Lyman 663 top punch. $85 shipped sold

Ideal...