Search:

8 hours into a 48-hour print. I used blaze orange so I wouldn't lose track of my feeder :lol:281268

So I've finally sorted out the reason for my ID's of holes being to small which I posted about previously. I knew PLA material would shrink and that was what was causing the ID's to be to small. I...

I don't think my xy are off based on the calibration cube I just printed, see my post reply to Tyler. I think the problem is the slicer. I sliced the drop tube using Cura. However when I sliced a...

Thanks for the dimensions Tyler. I ran a 20mm calibration cube just now and my X measures 20.02mm, Y 20.04mm and Z 19.94 mm. I can't believe my X and Y values would make my ID of the drop tube off by...

Has anyone had issues with the bullet feed dies fitting inside of the drop tubes? I'm trying to get the 223 feed die to insert into the drop tube and unless this is mean to be a press fit I don't see...

Yes, that would be appreciated and people can also use the plate generator as well. I just downloaded the most recent folder from the shared downloads link and the Collator Plate Generator does not...

I understand now. You connect the two pieces with the bolt making the angle adjustment while the bullet feeder is on the bench. Then you just hang the bullet feeder on the case feeder. I need to...

Yeah, I saw that but I was hopeful that I was just missing something, I really didn't was to drill a hole through my casefeeder.

I'm trying to attach the bullet feeder to my dillon case feeder using the dillon hang brackets. Do I need to drill a hole through the dillon case feeder in order the attach the bracket? I'm...

Doesn't the copper jacket impede the detection of the sensor? I believe the reduction in sensitivity can be as much as 75% when detecting copper. So if the range is normally 12mm when detecting...

Did the set screw rip out of the brass coupler? While building mine and testing I inadvertently created a jam and the motor kept turning which ripped the set screw out of the coupler. The brass...

Glad to hear it works with the reduced wall thickness. Simple is better.

Why have material between the sensor and the bullet at all? Is it to just have a flat surface to stop the sensor at a fixed distance? Why not use a hatch or multiple slot pattern to remove material...

It's awesome!

I knew there was a different base for the Greartisan, from the pictures of their bolt patterns they look to be the same which is why I asked the question. In hindsight the fact there is a different...

Do you, o416, know if the bolt pattern for that motor, https://www.amazon.com/Greartisan-Se.../dp/B07YBXMTWC, is the same as this one?
...

I'll purchase one on Amazon to try out, I'm sure they will work. Ordering it right now.

I'm working on a BOM and work instructions for the main base that uses the JGY-370 motor. I know there is a manual being created as well, I'd be happy to help create content or edit it as well. As...