I finally got everything together and assembled for my home made wet tumbler, it is not pretty like a commercially made unit you can buy
I have about $100.00 laid out, many things I had on hand...
Type: Posts; User: Big Dog
Forum: Reloading Equipment
I finally got everything together and assembled for my home made wet tumbler, it is not pretty like a commercially made unit you can buy
I have about $100.00 laid out, many things I had on hand...
Forum: Reloading Equipment
how about a video ?
I am in the process of making one similar to this
https://youtu.be/MchjmCIvzlY
Forum: Reloading Equipment
I used Skips design as a starting point
https://youtu.be/PoYqwGP_jKg
3 different size pans and 3 different size rollers, it can go from .300 Blackout up to .338 Lapua
the wire side is supposed to be facing out, that way it is easy to attach natural materials to help camouflage the blind
you need to create various shadows and edges that flutter in the breeze
wow, do you have the stove & coffee pot in there w/ a recliner ?
that is luxury livin in the woods
in Kaliforina that is called a "Dingbat", basically a apartment over a garage, and it looks...
I'm in the process of helping my cousin's son build a folding blind
we start w/ a 50" x 16' hog wire panel ( $22.00 @ Tractor Supply ), measured & rough cut w/ the bolt cutters, then cut &...
Forum: Cast Boolits
Breyers Gelato containers are not too tall and are wide & flat enough and are just right for cast bullet storage
all sizes of Folgers plastic coffee containers are good for all kinds of storage ...
Forum: Reloading Equipment
I can also add to this subject .....
I acquired 3 boxes of Barnes 110gr TAC-TX FB #30321 for full power/speed loads for the .300 Blackout, I had read of issues trying to seat them over on 300...
Forum: Cast Boolits
when working aluminum extrusion the tail stretcher would cut the ends even w/ a saw w/ wax, it will work well w/ lead on a steady cut, keep a heavy coating of wax on the blade to keep it lubed, you...
Forum: Case Forming / Re-forming
if you are having too much trouble forming and getting the shoulder properly formed you need to anneal the case before forming so that it does not spring back so much
Forum: Casting Equipment
this is the unit that I ordered
http://www.amazon.com/MaxiMatic-ESB-301F-Cuisine-Single-1000-Watt/dp/B000B2WOWE?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s01
the thermometer that I...
Forum: Casting Equipment
I do not have a master caster but this below is the base for my casting needs
I fit a piece of 3/4" plywood for a lower shelf and a piece to the top and have it set up to accept a removable table...
Forum: Casting Equipment
I would try adding some used motor oil to the mix (and maybe a bit of paraffin wax) and using a weed burner torch to get it burning to increase the heat evenly throughout
once you have molten...
Forum: Casting Equipment
I wear a comfortable pair of "Mule Skinners", and finding 2XL that fit & feel right is not easy
for less than $5.00 I ordered this along w/ a few other things to spread out the shipping costs per item
http://www.mcmaster.com/#catalog/122/3656/=11n5jl0
Impact-Resistant...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |