Search:

Interesting article...........larry

I agree with 44man. I am fairly new to casting and found out rather quickly I could never produce a perfect boolit. Visual check, Pretty pile, ugly pile, remelt pile. The ugly pile shoots as well as...

Lars45 lube prices are so inexpensive that I may never mix any lube again.

Dale53

X2, Dale53, and his lube works...........Haven't used any of Bulllshop's lube but I understand it works well...

Lloyd, you must have loaned it to my sisters husband. Anything that you do not physicaly go get within two weeks becomes his ie, Three Ton Chain Jack, Combination box/open end wrench set (3/8" to 1...

piwo, Bullshop, a member here makes and sells a sprue plate lube that is very good and very cheap, send him a PM he will get back to you.......larry

I am on my third lyman thermometer, first two replaced under waranty. Next will be a RCBS.
I have been casting for about a year....................larry

AnthonyB, I f the barrell is fitted properly, correct tension at lockup, it will probably be worth it. However you may be able to play with a national match barrel bushing and a non fitted barrel...

If you have a old hacksaw blade, bevel the back side of it, aprox 45degree, with a grinder. Blade is flexable and easy to use, gently scrape the old finish off. use paint remover for the checkering....

Leaving Cody go north to Red Lodge,Mt (as posted by onceabull)
A young couple, friends of our family, were here for x-mas. They live in Red Lodge, the photos of the country side are breath taking....

I only did one web search, all results found for white lightning were for 4 oz bottles at six to eight dollars. Anyone else get a price per bottle we could compare, not trying to step on anyone's...

Look in moulds, maintenance and design. Check the first sticky about Lee menting a lee mould. If it will work for a AL mould why wouldn't it work for a Lyman

It's more like a "Mason Line-Dixon Line" thing?..
Pat, not throwing rocks but only a yankee or a left coaster would refer to the Mason-Dixion Line in that manner.

With White Lightning being aprox three times the cost of LLA, I think I will stay with the latter, Just my own misguided opinion

We're fixin' to

Guido, what part of the south are you from?

GSPKurt, sorry I didn't check this thread before responding to your PM. This is a group buy mould, plain base. The preferred powder for this boolit and hunting loads seems to be Lil' Gun, check out...

bisopgrandpa, there is a thread in shooters.com , general area of the home page.
Title "how to post a photo".

Lars45 and Bullshop, both members here, both good people.

As I understand it, Elmer Keith was quite a character, loved S & W Revolves, anyone elses Burbon and would try to pay for goods and services with his autograph. I have read that he could hit targets/...

beagle, is Buffalo and Dad's still there?

I didn't know any better, I leave my lee at what ever level it is at when I decide to stop, has been full at times...........larry

GSPKurt, Excellent article, I have recently fell victim to the .357 in a rifle. I am, working with 180 Gr keith Group Buy sponsored by catshooter. My rifle comes alive with the 180 GR Boolit. Can't...

Mick, Bought a RCBS Rock Chucker in 77, Thought i would repace it with a "BETTER" Green Machine. I still have and use the Rock Chucker( my only press) The Green Machine Left within three months and...

rvpilot, I have a 1903A3 sporter converted to .308. I was having feeding problems with the 308 cartridge. The remedy is simple, load a cartridge of intended use forward in the magazine. Allow enough...

Ben, I have a lyman 311299 that drops at .310 on the driving bands but the nose is an average .299. A little smaller than you need.
I wonder if it would be fesable to "beagle" a mould to get the...

Cat, I had a problem with a stripped sprue plate pivot pin in my mould. Sent it back to Lee, they repaired it, quicker than expected.
Finally got to cast some of the boolits a few days ago, lubed...