Search:

Mainly just wanted to see if it would work however I am toying with trying it on hogs. Basically would have the power of two simultaneous 9mm impacts but with the added bonus of being subsonic it...

Cut and paste from a different thread. I should have posted it here but what can I sat? It is here now.
Well it worked and the impacts were pretty dang close. (will try to post the picture of it)...

Well it worked and the impacts were pretty dang close. (will try to post the picture of it) Recoil was mellow along with report. Ting qith a bit more lead next time. 148gr wadcutter behind a 147 FMJ...

As suggested I am adding my 2 bits to this thread. It ain't much and it will take time but I am working on a duplex load for my 16" AR type 350 legend. Using 7grs of Unique I first drop in a 150gr...

SPP has a potentially stronger case head. A quick email to Starline might be worth the effort.

AR15 with 16" barrel. Figure it will be a straight pull bolt action with these.

I have never had any patience so I threw these together.
150gr hardcast wadcutter
115 hardcast hollowpoint
Both polycoated
7grs of Unique
OAL 2.05
According to Gordons reloading tool I should...

After looking at a 350 legend case and seeing all that straight case length I got to wondering. Has anyone ever tried to duplex load one? A wadcutter in first the followed by whatever works for you....

I have a 1895 Nagant, an Astra 400 and a Ramline Exactor so yes.

Got my email this morning, payment on the way.
How long until they ship?
FYI, 1 Euro = 1 dollar US almost exactly. 134.39 Euro for 135 US Dollars.

There are some who believe a low volume load of a slow powder can lead to kabooms. The theory is when the powder lays flat the primers shoots a spark over the top igniting most of the powder at once...

Ordered 2k primers and a small lot of primed Fiochi hulls to try out. Hazmat was 37 bucks along with 13 dollars shipping.
Over a third of what I paid was to simply get it to my door.
Better than...

I tumbled a handful of 000 buck, it came out looking very nice. Good enough I might PC some of them just for the hell of it. Just under an hour in the tumbler with nothing but the shot in there.

Of course powder charge/shot charge is the biggest factor but those are adjustable by the loader. Other than that is it which primer, hull, crimp or the wad?

I do now.

IM sent

Is this group buy still open???
Woudn't mind a brass 4 cavity 150gr HP mold myself.

My $7 goodwill special is about 25f off. I have it figured out now.

I cast dive weights from the same lead I cast bullets.

I'm in too. let me know what I need to do.
One box is enough for me.

ETA; As a former letter carrier I can appreciate you you not wanting your mailman to have to deal with a home pickup. That...

Very interesting, going to give it try.
I also am also learning about powdercoating bullets so the obvious question is will powder coating the lead balls in the tumbler help?
BTW, most of the...

Chuck your barrel up in a lathe and remove a few thousands from the tang on the rear of the barrel and you can use .38acp/.38 super brass.
ETA; 1911 recoil springs will work in these pistols.

As someone who has killed three chronographs (so far) I have to say...
It is worth it. The value of the data you can get from one is well worth the money spent....


the first time


the...

My .44 mag hunting load (and range/target load) is a 310gr flatnose (Lee mold) water dropped wheel weight bullet over (I think, I would have to look it up to be sure) 20grs of 1680. I get around 1200...

You can suppress those ya know ;)