Search:

I have one I bought from a friend on this site. It was originally a .32 rimfire. The breech block had been converted to center fire. It had a bad bore so I sent it to John Taylor for relining to...

Hard to tell what you are asking for. Canjar triggers were set triggers with a unique twist. Cock the action and pull the trigger for a decent single-stage pull, Or, cock the action, push the...

A suppressor on a supersonic rifle doesn't help much. In most cases even with suppressor the report still exceeds 100 dB by a margin. Subsonic is another thing. The report is naturally less loud. ...

John is correct. He had to do that with the Marble's sight he put on my original No.2. Mine is in .32S&W long. I loaded to 1,000 fps or so to keep it quiet.

You need to find a Glock armorer. Inquire at local gun shops. sometimes they will have an armorer visit to tune up customer's guns. Or try a different magazine.

Jim

I bet that gun hurts your ears.

Jim

This assumption is dependent upon the height of the sights above the rifle's bore. It is a handy rule of thumb with sights about one to one-and-a-half inches above the bore. It does not work if the...

Have you tried Chazsel? They have .22 barrels in different lengths thaat are chambered. This one is threaded as well.

https://chaszel.com/product/22-long-rifle-threaded-barrel/

Jim

Back when I had a class C motorhome I carried a 110 volt impact wrench because the motorhome had a gen set. Got a flat and could not loosen the lug nuts with it. I had to borrow a breaker bar from...

Looks like I need a bit more time with the 40:1 mix. I melted it in a new Lee 20 lb bottom pour. It took a while to get the spout adjusted. First it was dropping too muh alloy and making a mess. ...

Hmm... I just went out to cast up some boolits from the 40:1 mix and learned thein spite of my memorey, they did not come from a Lee mould. Rather it is an Arsenal that is marked '98 gr SWC - RCBS...

OK,it's the same day. I shot three 3-shot groups at 25 yards. Here is one of them. It is representive. Iam exstatic.

305039

305040

I had to make it a lot smller.

Jim

I gave the H&R cartridge some thought. After all I have a stainless 4" S&W J-frame in that caliber. But I shoot a lot of S&W Long ammunition in it for hearing's sake. And that is why I stuck to...

Yesterday I loaded up some Lee 98 grain RNFP boolits - 100 grains in COWW and Lee Liqid Alox. Weighed to withing one grain of each other. 3.8 grains of AA#5. The crimp groove on that boolit is in...

I have a copy of that column. Downloaded it. Very interesting.

Jim

The rifle is a remington #2 rolling block that John Taylor relined to .32 S&W long. Nice gun with 26" barrel and a nice crisp trigger. We put a Marbles tang sight on it and John made the front...

Brian Pearce has a nice writeup in the recenyt Handloader magazine using a pair of pumps: a mocel 14 and a model 141.

Jim

Might try Ammoseek.com. https://ammoseek.com/? I have found primer there fo $80.00/M. Plus hazmat & shipping.

Jim

Small groups in a defensive course means you are shooting too slow.

Some good points here. In my case I use a dental pick to unclog the valve when it gets plugged. This happens every time you drain the alloy from the pot to use something else. The dross seeemsto...

That's about it. Except it was a Contender shot from Creednoor position with the pistol braced against my right leg. I had been shooting Contenders in .357 MAX and .44 mag. but this was something...

It sounds like you aree loading for a .30-30. They headspace on the cartridge rim. The fact that factory cases get longer when you fire them means your chamber is cut deeply. When you reload try...

Last time I went to the metal yard I wound up with about ten lbs ofbattery post clamps. They include the clamping bolts but I wonder if there is any standard for these? Most are pretty soft. I'd...

Even worse, perhaps, is the bite you get from a pop rivet gun. Every time.

Jim

I used to use the same method for making .30-06 AI from reegular .30-06 brass as well as .300 Weatherby from .300 H&H. With those you can just fire factory ammunition in the improved chamber but you...