well guys soon as work gets out of the way and the weather lets me i am gonna put it to the test and see what she can do
from the research and what i have heard from people they are good guns and...
Type: Posts; User: iron mule
Forum: AirGuns
well guys soon as work gets out of the way and the weather lets me i am gonna put it to the test and see what she can do
from the research and what i have heard from people they are good guns and...
Forum: AirGuns
hey guys
been looking at getting into the pcp guns for a while
talking and exchanging some ideas and info with the guys over at the GTA forum
and from their recommendations decided to get the...
Forum: Muzzleloading.
been using it for years prbly went thru about 500 lbs and never had any issues
burns good and clean ///fouls less// clean up is easy// highly recommend it
mule
Forum: Boolit Lube !
i have been using lars c-red for years on my 7 tcu in the contender both 10 and 14 inch barrels
never had a problem of any kind
mule
yep i agree i have several of tom's mold never had a problem with them
wish other companies out there had the same care for their products
mule
no much info to go from here
first and most common is that there may be some lead between the halves preventing them closing all the way
second the alignment pins may need to be re-set
third the...
Forum: Boolit Lube !
you will not be disappointed with the choice of going to the c-red been using it for years and it has never failed me
and as a plus you have some good people to deal with and they are members here...
Forum: Boolit Lube !
have been adding murphy's to my lube for a long time it does help and when compared to some that was stored long term that did not have it against some that did the murphy's did not dry out as bad ...
Forum: Cast Boolits
wardo1974
what may have caused the follower to jam is one of a couple things
either packing grease had melted and caused it to seize or there is a burr//slight dent where the tube enters the...
Forum: Cast Boolits
here is one more for you all
was at a cowboy completion a few years back and a shooter there was short on ammo and was asking around if any one had any extra to spare
he asked me what caliber you...
Forum: Cast Boolits
hello bee
i believe that you have one of two things happening here or both
1. the throat of the case is too tight and it require too much force to seat the bullet
solution check the inside...
Forum: Black Powder Cartridge
it can be either depends on the gun and what your intended use for it is
if you need expansion then soft would be best //if this works
if just for plinking and you are not going for target type...
Forum: Reloading Equipment
i have one that i use regularly
on mine i took the turrent advance rod out and do this by hand
i also prime off the press by hand
one thing i did is i very lightly lube the turrent with case...
Forum: Casting Equipment
sorry forgot to add the link to NOE but i see that Duke bailed me out
mule
Forum: Hunting with CB's
i would bring my shotgun and a box of shells to school on the bus and then take them to the math classroom where the teacher kept them for an afternoon quail hunt with him
the only problem i had...
Forum: Casting Equipment
you may want to check out this one from NOE
i have one in the gas check version and in plain base style both shot excellent from a marlin micro groove barrel
they also work just as good from...
Forum: Hunting with CB's
double lung shot on both one clipped the heart//neither hit shoulder or leg going in one got a shoulder on opposite side did not exit
both wound channels were good but did not destroy a lot of...
Forum: Cast Boolits
unique in 38 spl think the year was 73/74
mule
Forum: Hunting with CB's
hello rush
i have used it on a couple medium sized does down here in south ms
was in a 7tcu from a 12 inch contender
did the job on them very well but i had good shot placement on both slight...
Forum: Reloading Equipment
gonna give you another welcome and follow cajun shooters advice it is good and will help you as you advance in this/// but feel free to ask questions
get ready to take a little ribbing here now...
hello
will second the good picture opinion
and also welcome you here hope your stay is a good one
mule
Forum: Cast Boolits
cleaned up about 400 lbs of good scrap lead and cww/sww now have a nice pile of shiny ingots to sort and stack
cleaned about 5000 9mm brass///same amount of 40 s/w brass and same amount of 45 acp...
Forum: Reloading Equipment
that may be true that the cases were just deprimed and not resized
i do that all the time with ss cleaning i first deprime the brass then run it thru a cleaning cycle with ss media
i do this to...
Forum: Gunsmithing Tips & Tricks
bonz ask them what the procedure for this is
will this be a strip down cleaning //as in disassemble the gun and clean all parts
or just remove the grips and clean as is
also ask what chemicals...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |