Search:

Is there an offset that fits the bullet feeder die? I printed the size 11 from the AP files but it's a little big. I can use some tape to make it fit but thought I would ask.

Sorry for this question that probably has been asked many times, I was not able to find it in the search. Is the only way to run the JGY motor is using the 8mm hex coupler? Wondering if something can...

That Maths god were with me for once. Both set screws came loose on the cog wheel that feeds the filament. I somehow got it almost exactly right when I cut the top in half.

Is the JGY motor better...

That looks amazing!! I would definitely be interested in giving that a try. I see no mess there compared to my bench lol.

Looks like Tyler might be updating the manual and files. Keep checking his Downloads link on his signature. All the information you need is in that great manual he has.

Is anyone using the Double...

Happy to report back that it's working perfectly! Thank you for creating the files. Some of the cases shoot down, some like to gumball swirl down but no issues getting through the Adapters or drop...

Awesome thank you! I'll print now and report back.

I can sand lol, I didn't know if you had a easy template that could be editable without having to remake the entire thing just for 14mm.

Before I print a drop tube, the 40 bullet insert will fit...

I was dumb and had to look up the base specs for 45lc cases. Are there any plans to say do a 14/15mm drop tubes/adapters? I'm probably one of the few doing 45lc on a progressive. The DAA spring is...

Ok, I understand now with the drop tube/bullet feed die. I am currently using the 12mm like you said with the 12mm spring to Dt spring into the 9mm drop tube and that is working great. Some are...

The manual says the bullet inserts can fit on the drop tubes, I have a 9mm insert that won't fit on the 12mm drop tube, but it will on the 9mm drop tube I have. Do I have an older 9mm insert/dropper?...

Have a xl750 coming in, I use the post mount for my AP currently. Can the post mount fit on Dillon's case mount tube? Switching over to case feeding for now, Should I buy a set of case tubes incase I...

Mine fit in my 550/Hornady ap. I used PLA .2 LH.

I hope this helps someone, wiring is not my thing and took me a bit to figure it out. This works and can explain more if need.

https://i.imgur.com/fD1SGizl.png

Shop didn't have metric bearings >< so I'll have to order. Is it the same size of bearing for all the feed inserts, 9,45,223,308? I thought I saw 2.5mm but just want to make sure.

I was about to ask that, I have a Grainger 2 mins down the road from work and saw those.

If using the MBF motor, does the roll pin need to be in a certain spot on the shaft to use Tyler's and...

Hello!

I printed Mikes feeder for the MBF motor and I don't have that motor, I saw Tylers post back some threads about getting that motor from MCM. I can't find the Turning plates nose up/down for...

100% AGREE!!!, Very knowledgeable with any help.

Great news! I bought a micro meter like Doug said to do. Played with my crimp die and got it adjusted to crimp 471.5ish pretty much. It plunks in each hole and falls right out. Before I was using my...

I do crimp with the Lee factory crimp die and seat with a different die. Doug helped me majorly because I couldn't even push a .452 bullet through the cylinder and now I can with ease. I reload for 8...

Long story short, I sent my cylinders to Doug and had them reamed out. My boolits actually fit my cylinders now!.

I'm still having slightly the same problem. If I don't do a really heavy crimp and...