Search:

Seems kinda odd that someone limited to lifting 20 pounds can break a 600 pound hogs back with a stick.

At least you found it floatin.

Whoever made it had no sense of style or function.

The difference between the smokeless and BP measure is primarily an aluminum hopper.A long drop tube would be desirable also.

Out of a half dozen measures,my herters is my "go to" measure for handgun loads.

I noticed the same 30 years ago with my 44 mag rifle.I did not like it .That was the reason I got away from 4227 and went with H110 for my heavy loads.But then if it does not foul anything up,and you...

Near as I can tell it is a european based company.Thay claim "most"products are made there. http://www.smartreloader-usa.com/home.html

Yes and NO.The old models were different size frames.The new models were the same frames but the blackhawk had a smaller grip.The same as the OM BH and single six with the XR3RED.

Not necessarily so.Looking thru data for military ammunition for 30 cal and 50 cal blanks I come up with this.30 cal,M1909,SR4990.M3,IMR4895. 50 cal,M1A1,700X,M1,WC150

Is that a big round slotted spoon?

Heavy one piece stainless slotted spoon works for me.I flux with parafin and it makes the clips let go of all the lead.

Marlin has used a 1in38 twist for many years .I think some of the newer cowboy guns use a faster twist.My 1979 vintage 1894 will not shoot light cast loads worth a darn.It does shoot 240 to 250 gr...

Hornaday makes a 6.5 bullet at .268 dia for the carcano.My folding bayonet carbine will not shoot the .264 dia bullets. ...

Many older presses such as the Lyman spartan have reversible linkage to extend the ram on the upstroke.Might be really handy for this.

Wayne,which JR do you have ? Early or late linkage? The 32-20 adapter die for the 310 is a #3.The priming chamber for the 310 and shellholder for the JR is a #10. The neck sizing die will be a...

In the later years neck size and decap dies were listed for use with the 310

I cant get the link to work from my work computer.

I have a 1911 built on a crown frame.It was purchased in the late 70's.

Not from a batterey.Melt away.

I have found that triple round ball loads in my 32 mag are quite accurate.They do a smack down on small game.

I have been eyeing their 1 ton arbor press to use on the loading bench.

30 years ago I cut the bottom off a propane waterheater.Now I use a fryer burner.Made a pot out of a big 30 lb freon bottle.The rounded bottom is easy to scrape.

Makin buckskin?You will also need brains.

Is .251 bore dia or larger?My 25 wont pass a .250 easily.Sounds to me that a softer bullet PP will expand and keep the bore clean.

Where is the Lazy Boy?