I just bought four 8oz cans of SR4759 (all same lot#) a few weeks ago. I paid too much but, not any more than what other obsolete powder is bringing now. Actually, not much more than any powder is...
Type: Posts; User: Gav-n-Tn
Forum: Factory & Surplus Powder
I just bought four 8oz cans of SR4759 (all same lot#) a few weeks ago. I paid too much but, not any more than what other obsolete powder is bringing now. Actually, not much more than any powder is...
Forum: Factory & Surplus Powder
I just landed 4 pounds of obsolete SR4759. Hoping to work up some smokeless loads for 45-75
Forum: Case Forming / Re-forming
I don’t know how much neck you’re working with but a mini tubing cutter might work. That’s what I’m using for 348 to 45-75 prior to conversion.
Forum: AirGuns
I bought a Ruger pellet rifle years ago just because it was a Ruger. With the right pellets, I can nail a fly on a telephone pole at 40ft. It came with a scope of course.
Forum: Gunsmithing Tips & Tricks
I have a M37 Deerslayer from the first year. These are perfect for lefties! Almost sold mine a few times but never did. Yours looks great!
Forum: Cast Boolits
I read or watched somewhere about dialing in a load using increments of 3% of your first good group as you progress up or down the ladder. I hope my post makes sense.
Forum: Case Forming / Re-forming
Seems like a break action single shot would be a cheaper platform. I guess it depends on what you have to work with.
Forum: Reloading Equipment
I was just looking at their powder funnel kit this morning. I wish they had a better selection of caliber adapters.
Forum: Reloading Equipment
I’ve looked at that press pretty hard. I’ve kind of pre planned its possibility in the future. I’ve exchanged all of my die lock rings for the Forster’s. That’s a step anyway.
Forum: Reloading Equipment
I found the extra collets to be very reasonable. I would think your time to modify would be worth more than the correct collet. I just bought every one I thought I’d need in the foreseeable future.
Forum: Case Forming / Re-forming
That video popped up and I watched it. That cartridge comparison he showed made it stick out like a tater on a fork. I didn’t read the details on how he did the conversion. Time and money is all you...
Forum: Case Forming / Re-forming
Notice the dot doesn’t have the NATO cross in it. You may be on to something though. Yesterday -or day before- someone replied to a thread and said they had talked to someone at Lake City. They were...
Forum: Case Forming / Re-forming
I’m tumbling some brass as I type that looked pathetic. Tumbling in walnut for about 5 hours at this point. I’m not concerned about the tarnish so much as it being clean enough and the ability to...
Forum: Case Forming / Re-forming
You may have to fire form several times? Is that the best donor case for what you’re doing? I don’t know enough about it but, I know you’re trying to form a straight wall case. If the 348 doesn’t...
Forum: Case Forming / Re-forming
https://noebulletmolds.com/site/product-category/bullet-casting-reloading/expanders/expander-plug-rifle/
Call them and confirm they work with the Lee expander die. I’m 90+% they do.
Forum: Case Forming / Re-forming
I think that Lee die is more for slightly flaring the case mouth for cast boolits. What you need is a series of expanders that will step the neck up in increments combined with annealing...
Forum: Case Forming / Re-forming
What incremental sizing steps are you using to get the neck from.348 to .50? Seems like it would be similar to what me and others are doing with forming 348 into 45-75? I don’t like the thought of...
Forum: Case Forming / Re-forming
I am set up in the following order: expander mandrels .3365, .4095, .4465 then .457 expander ball and finally RCBS FL “Legacy” die. I plan on annealing during expansion increments. I bought some...
Forum: Case Forming / Re-forming
Anyone have an answer or opinion?
Forum: Case Forming / Re-forming
I got it home, hooked it up and turned it on. It produces a perfect circle of flame so no need to rotate the case. It’s going to be a 100% manual operation because of the U-shape. I’m going to just...
Forum: Case Forming / Re-forming
For anyone interested and poor like me, I bought this propane torch kit at HF for the tip that provides a circular flame. I just need to figure out the dwell time in order to not over heat.322795
Forum: Case Forming / Re-forming
Correction on my post. I went back and watched that segment of the video. The brass is annealed after the first draw with more draws to come. Annealing the whole case makes sense at that point.
Forum: Case Forming / Re-forming
How far down the 348 case is everyone annealing? Seems like you’d want to get down as far as where the taper starts to form for the 45-75?
Forum: Case Forming / Re-forming
I watched a video of Starline making pistol brass and the whole thing went into the oven. Kinda threw me off because everyone says not to anneal the web.
Forum: Case Forming / Re-forming
In my case, mine actually is a Chapparal. I’ve had it for over a decade or more. New, unfired, in the box. My understanding is that the Chapparal chamber dimensions were based on the original...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |