Search:

I have a lightly used H&R 223 bull barrel. Has 21 shot through it per the 1 shot by Sheels where I bought it and the 20 I shot through it. It has a vortex 4x12 scope new to the gun. I would like...

Close this please. New thread started.

I have a mold that makes #4 buckshot. .238. They are not fully round due to the cut off the mold. PM Me

I have a lightly used H&R 223 I bought from Sheels. They said it was new when they took it in on trade. Store policy is for them to check working order of all firearms they take in. So it was sold as...

I have what you are looking for. PM me for details.

I'll take a cutter.

Mold needs to be .314 dia. and about 95 grains. The cases are 32 centerfire and will be sized in a 32S&W die. Any thoughts on how to build a mold. I have a lathe and mill just not sure on making the...

I have a .452 and .429. CH dies. On the .429 I use .40 S&W cases for half jackets. I use a lee case trimmer with a 10/24 allen pan head screw turned down to the inside diameter. Cut to your desired...

LMK a price when you have it figured out.

Thanks for the info.

I have wired several cnc machines over the last few months. The guy I do it for is now willing to make me dies and teach me how. This may take some time and I don't own the machines I will be taught...

Congrats

Thanks, for the info. I have made a couple of reamer stops for my lee case trimmer. Not sure I want to make to many. So I'm headed to the lathe to make an adjustable one. This will allow me to make...

Yes about bullet swaging dies. I have a precision mathews pm727m mill and a bolton 12 x 30 lathe. This is my home set up. I'm an I&E tech by trade. So I wired a friend of mines CNC machine shop that...

I'm in Wyoming. I'm wanting to use spent 9mm, 40s&w, and .223 into bullets I can use. Same as BTsnipers or C/H one shot dies to start. Maybe .380 as well. This seems simple to make a punch to seat...

Who makes their own dies? And is willing to help beginner /hobbie machinest.

I have a die that will derim a 22 mag like the 22 spent case. The result is a 1.260 jacket. I use a Lee case trimmer with an 8-32 allen bolt turned down to fit inside the jacket to trim jackets. I...

Can someone tell me your method or drilling, reaming and honing / polishing the internal of the die?

So I have a Corbin .224 dies missing the squirt die. I would like to make one. Any threads or Ideas on how to.


Thanks

I never had TAC powder shoot very well. Same type of groups with factory bullet. Usually one load that shot well was all. I switched to CFE 223 and have much better groups over a wider powder charge.

I have a black one off a 6.5 creed. i filled the channel with apoxy and half the stock. You can have it for shipping cost. I drop is off and ups will pack it and ship it. You pay actual cost.

This may have been a topic of the past or i can't find it to my liking. I pick up all the brass I can find at the range. Most of which is 223 and 9mm. I have used several calibers of brass cartridges...

Looking for a ruger or ? for wax quick draw. .45 cal. Nothing special just needs to function properly with shotgun primed cases. LMK what you have.

Thanks Ray

Looking for .224 .9mm 40s&w 45 acp 6mm or any dies that will work to make other spent cartridges into one i can use. .357, 41 mag, 9mm, 40s&w, .429, .452


Thanks Ray

Looking for around 1 100 pieces. 150gr. I will buy reloading components brass and jacketed lead or factory loaded.

I have some 4064,335 or 4831sc powder for small rifle primers. Casper Wy. 1k primers for 1lb