Search:

Here is another file you might be interested in. It is cut down from one of the proximity drop tubes. Slips over the LEE tubing. Slide it up and down to where you want. Haven't tested it yet, but...

I realized I miscalculated on that last one I posted. Try this one instead. It should be close. Not sure what you are doing, weather you need the beveled entry or not.

XD, I have been using freecad to do my modifying. I primarily use the part workbench. You can import an stl as a mesh. Then create shape from mesh, then convert to solid. Then you can run...

I modified this several months ago. Is this what you are looking for?

That appears to be the correct one for the standard body.

I tested the 130 in the top hole. It works good. Even the 123 works well in the top hole, as its tip is past them. I have nothing longer or heavier than the 130 to test. It may be necessary to...

The revised insert still required a little cleanup around the holes, but works great afterwards. 123's work well from the middle hole. A 130 scirocco feed some and stuck some in the middle,...

Insert ID is too small. I can force bullets in, but tight. Ends are deburred. I can test print a tube for ID size when I am done with current print.

Its on the printer. I will know tonight how it does. Thank you.

Hi TylerR, have any luck with the Grendel die? Thanks

Look Here about 20 rows up. Use the #11 spring adapters. I think that is what you are referring to. If you are going on top of a feed die you will also need the medium or large you were looking...

I can see the difference now from your videos. The one I posted doesn't have that configuration in its firmware. As you obviously know, getting the right firmware is the key to making it work right....

Should function the same as the delay relay I posted last April.

Here

Yours is easier to wire and has a nicer box for the buttons and display. The delay relays work well at first, but are...

There is one in TylerR's files.

https://github.com/BF556/Feeder/blob/main/1.%20Main%20Body/Main_Body_Wall_Extender_300mm.stl

I am referring to the portion with the jaws and hook. Where do I find stl's for those? I am familiar with TylerR's base. Thanks

Roger, where did you find the APP parts in black? I am used to seeing them in red. Thanks

Have you tried TylerR's drop tube spacer?

https://github.com/BF556/Feeder/blob/main/6.%20Drop%20Tubes/Drop_Tube_Spacer_Small.stl

Brown is positive.
Blue is negative.
Black is the trigger.
DN & DN2 sensors connect trigger to negative ground.
DP & DP2 sensors connect trigger to positive supply.

DP= normally open...

If you want the proximity sensor mounted on the drop tube of the collator, then yes. If you will be going press mounted then no.

The circuit board GWS posted is a YYC-2S timing delay relay. It can be used in place of the Kyoto KF0602D as listed in the manual. This is intended primarily for press mounted proximity sensors. ...

The link in the manual is up again.

https://www.amazon.com/gp/product/B00TXXH4OA/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

What you are looking for is the PRD18-14DN2 model. The...

This one is even cheaper.

https://www.zoro.com/molon-dc-gearmotor-12-rpm-12v-vented-chm-1212-1m/i/G100461364/

A list of molon motors;
...

This is one method of reducing file size that works well.

https://myminifactory.github.io/Fast-Quadric-Mesh-Simplification/


Another good way is to use Microsoft 3d builder.

open file in...

Updated files.

Edit; added size 16.

A big thank you to both TylerR and GWS. Well done guys. :drinks: