Search:

I make my own M type expander dies to what ever size I need. My little 7x14 lathe is probably the best addition to my loading bench I have ever made.

Our time may end but time itself will never end.

After retirement, we moved a couple of miles outside Eureka Mt from 32 years in AK. Four new houses have been built in my neighborhood which is now ten houses on about 140 acres. My closest neighbor...

Mine is a 22/410 and is one that will be passed to a grandson. Best grouse gun ever.

My printer has USB, copier/scanner and wi fi. You can have it all but as has been said, let the buyer beware.

I bought a 550b about 1998. Never had a bit of trouble with it. I have loaded enough rounds with it that manually indexing happens without even thinking about it.

I got an adapter that uses small pistol or rifle primers instead of caps. I get no residue or leakage from it.
.

If you have a Lyman or RCBS sizer and dies you can remove the stop bolt from the sizer and just push the boolits out the bottom of the die.

I have no idea what it costs to have contractors work on my house as I have always done my own repairs. I turned a bedroom into a bathroom for well under $1000. I bought most of the fixtures from the...

I use H116 in several small rifle cases with cast. 22H and KH, 223, 256 win 7.62x39 and even 30/30 all work well with H116. It's very similar to AA1680.

Get a rat terrier. They are great pets and hate rats and mice.

I have never seen an armadillo but it sounds like they would make good targets. How fast can they run?

Lots of my rifles are fun to soot but the 92 Win in 25/20 is probably at the top.

Last year I got a 3x4 buck with my Ruger BH in 41 mag using the 300gr Lee at about 1200 fps. It made about 5 yds before going down. I have several rifles ready to go but hunting deer in these parts...

I got caught in a primer shortage many years ago. I promised myself it wouldn't happen again and it won't. I have slowly built my component supply until I have enough to last the rest of my life...

I worked corrections in Ak for 20years. Depending on the facility, we used either the Rem 870 or one of two AR 15s. One AR was open sights the other had an 8x Leupold. From the tower it was 250 yds...

The Sinclair tool is carbide and makes the primer pocket the correct diameter and depth. If the primers were crimped in, there will be a sharp edge on the pocket that needs to be removed. I use an...

No such thing as bullet proof. You just need bigger bullets

I have a place to shoot on my property. Not fancy just a sand mound backstop on a steep hillside with 150yds to shoot. With one exceptions, I don't invite others to shoot on my property. This friend...

I too haven't noticed any effect of the computer glitch. Rarely see a contrail here so I didn't notice they were gone. It's been several years since I have been on a plane and a lot longer since I've...

I shoot the 300 gr Lee with a case full of Lilgun for just under 2000 fps. It handles that just fine.

I don't get dressed without my Swiss Army "tool kit" the tinker model. It isn't one of the big fat ones, just a normal size pocket knife. It doesn't have the corkscrew which I find useless but has a...

Sinclair makes 3 different size primer pocked unifiers. Small that fits both small rifle and pistol. Lg pistol and lg rifle . All are carbide and ream the pocket to the proper size and depth. If the...

I too have used a Cromebook for about 5 years and like it a lot but I only use it for Internet use. It is limited on what it will do and on on unit storage.

Yeah, it makes good sense business wise. We still get the no BS warranty without Dillon getting screwed. I have only two Dillon presses, a SDB for about two years and a 550b for about 25 years. So...