Search:

I have watched your video a few times and plan to do that job on a Remington N0. 5. I am still developing ways to do the brass and will then take on the trigger spring next. Thanks for all of your...

I am shooting a Number 5 Remington Rolling Block rifle chambered in 7 mm. I am making the brass from modified 7x57 and 30 06 Springfield shells. The second time I took it out to shoot I brought...

I have been putting a little oil on the hinge and today I used a section of flat shoe string, slipped under the front (top) of the ladder and up she came. Hadn't been up for years. I have the...

I recently bought a Rolling Block rifle that has the sight protector ears that look like a roller coaster. I have been unable to raise the ladder sight and am now ready to shoot it, but I don't...

I have a 1900 Remington rolling block rifle in 7x57 in transit now. I have reworked 20 rounds of brass by expanding the necks with a 8mm expander and then sized the neck down with a 7mm die to...

I used to shoot military bolt action matches at the red castle gun club at Tulsa,OK. One of the shooters was shooting a Swedish rifle that the barrel had been set back to shoot varmit bullets. He...

Anyone know how to make this conversion?

I recently bought a Swedish sporter rolling block rifle and the front sight was missing. It is the sweat on type with the bead aiming point. There should be some from the rifles that have had the...

I had a lot of shotgun primers, removed from shotgun shells that were broken down to salvage components when the crow roost moved. I placed the primers in a glass jar, filled it with transmission...

Has anyone experienced bolt lug cracks at the split lug on the Model 95 bolt? I had two, the one numbered to the rifle (excellent condition) and after ordering a replacement from a supply source...

S&K makes a low scout mount and it is a good one. The countersunk screw that comes with it is too long but can be cut off off to fit. The NOE 316299 bullet is a good fit for most model 91 rifles...

Before changing your chamber send Buckshot a message and check on his nose sizer dies. He can tell you what you will need, and it will take less time than a gunsmith. You might take a cast boolit...

Forgot my manners; or short term memory loss, you do fine work to be able to drill and tap on an angle like that. My skills are more on the order of cutting a spring and grinding the ends flat.

I shot a Schmidt Rubin 1911 in the Military Bolt Action Competition at our club for a couple years and had some problems not feeling the second stage of the pull and letting one go before expected,...

I have three Lee 1000 presses and they all have problems with the primer station. One is used for the .380 Auto and another is for the .45 ACP. The cases for the .45 have to be run through the...

Hello Blammer,

I will have to drop out on this order, it will be a good boolit no doubt, but things have changed for me here. I am number 8 on the aluminum list. Thanks.

Regards,

Bob

I am loading a NOE 38/200 cast bullet for a Mk IV Webley 38 S&W revolver. The alloy is plumbers lead and casts .364. The bullets are then pan lubed with equal parts of lanolin, vaseline, and...

Hello,

Put me down for a 2 cavity aluminum.

Thanks,

Bob

Hello Landric,
I will take a two cavity aluminum plain base. PM for details?
Thanks,

Bob

I have been shooting a 03a3 for years and found some time ago you can set the windage between the clicks and it will hold just fine. If you need to adjust move the wheel in the direction you want to...

Hello Sundog,

I just read the account of the buff runners and really enjoyed it and have a printed account of the Billy Dixon shot at Adoby Walls.Those guys had the ideal shooting to become good...

In addition to the above methods try this; swing the sprue plate with a gloved hand to cut the sprue, then back the plate up to cover the cut sprue and press it down to flatten the bump. Hold it...

The B Square is a good mount if it is set up right. It has a mixture of steel and aluminum parts, as do most of the no gunsmith mounts. The trick is to determine the zero of the rifle (with cast...

We have had only two matches to date (no December match due to the holidays) and I won the first match with a 291. The second match was won by a shooter with a Persian Mauser 98/29 with a score of...

Hello Corky, The Sniper Class is run at the same time as the regular match, it just isn't scored with the 'as issued' shooters. We have a 3X power limit and any mounts can be used. We only have 14...