Reddot & 200 grs boolit
Will get you there in bolt action no problems with good accuracy
Another option would be trailboss
Type: Posts; User: GoodAlloy
Reddot & 200 grs boolit
Will get you there in bolt action no problems with good accuracy
Another option would be trailboss
Forum: Cast Boolits
If you are over max. I would say that the gas channel is somewhat restricted. If you purchased it used. I would suspect someone used Boolits in it.
At the cost of the barrels I would not plan to use...
Forum: Cast Boolits
The softer check material obutrates and seals the bore better than a hard check. Makes a better gas seal.
Same effect as using softer alloy to get better seal in some cases.
If you can consistently put all shots on a playing card from 21ft standing unsupported or if off the bench at 40 yards you have an accurate toy. If you want more than that you will need to build one...
Forum: Frequently Asked Questions
How is the best way to delete all unwanted or unneeded pictures from the server? I have a bunch of photos of past sales that need to go away?
Thx
Forum: Gas Checks
That is true. Retumbo.
But what is said is still true. As far as how each tool works. I also stated that I have had comparable accuracy from checks out of either tool as long as user pays attention...
Forum: Gas Checks
I have both Pats and Charlies tools. If you want to make a bunch of checks fast for standard gas check shank bullets then you want to go with Charlie tool in my opinion. However if you want to make...
Forum: Gas Checks
I have been bit by the check making bug!
I cannot believe the accuracy and quality that can be had with Yonky's coil aluminum. I have been using his DDQ metal and the results are better than any...
The way it all went down I think this is kind of a kick in the seat of the pants.
"Let alone they had full access to all my drawings - not cool at all".
With that being said I will not be buying...
Forum: Gas Checks
Case Stuffer is 100% correct. All frechex leave out side burr so thickness or I should say over thickness produces better results. With Pats tool while slower in production gives the option of...
Forum: Gas Checks
So what does sage make his checks from? .010 half hard? Would that be about like lith plate?
Forum: Gas Checks
Duke, does the .09 in 30 cal stay on good to target?
Well guys I made order from yonky for .09 & .11
Soft alloy. I will try those and see how the results are. Thanks to all you guys for chiming in.
Forum: Gas Checks
Guys, what is the best place to start with aluminum sheet for making 35 cal checks that are consistent and stay on all the to target? I understand that thickness along with fit to boolit is...
Forum: Cast Boolits
If they size out right out if your sizing die and do well on target. Why fuss? If you are looking for the ultimate in bench grade accuracy chances are you have the wrong mould, alloy, and cartridge...
Forum: Cast Boolits
Good steel is square on the mark and I would agree 100%. Feeding soft alloy can be a problem on rough feed ramps. But if your ramp is smooth you don't need hard alloy unless you want to run full bore...
Forum: Cast Boolits
4.5 power pistol with 145~155 and don't worry you will be pleased
Forum: Cast Boolits
If you are bent on 2400. I would run a small pistol mag primer and a compressed load of 2400. It will cycle. It will also give you a wide velocity deviation and mediocre accuracy with unburnt kernels...
Forum: Cast Boolits
Good old Bullseye. Works good in most all applications. Best in some but adaquate in most all cases. I have had good results with AA#2, W231, Reddot,Greendot, Unique,AA#5, well I think you get the...
What you do is keep the autos. Find some youngsters that would like to shoot some and let them. They would be more than happy to help with the brass policing in exchange for your wisdom and kindness...
The more bearing surface you have the softer Alloy you can run. the less bearing surface the harder you gotta use to grip the rifling and get started straighter
What powder charge are you running at.
most times to get the best accuracy out of the Short bearing Keith's you have to run it a little warm and use at least a hardness of around 14 or 15 Brinell.
I see your piont with all the statements you have made. You have spent alot of time and effort in you endevors that much we all know. I just think that the Keith is a good all around boolit. If...
Comparing Boolits to XTP's has no context. Condoms are a whole different situation.
If you are wanting the recoil and muzzle bast of the 330 grs boolit then yes it will out perform a 250 grs Keith...
"the Keith is Dead Today" !!
Please refrain from this slander!!!
The Keith is just as good as it ever was. The best Keith load against any other best load is a context of what load development you...
Al's moulds are second to none. customer service is outstanding. the last mould I bought was at my door Before he received my payment.
absolutely first class service and products
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |