Search:

Mine has the tang sight and has no issues.

It is doable by yourself take your time and follow the instructions.

They are very impressive to watch.

Congratulations! Thanks for posting.

Congratulations!! We just passed 41.

Good work. I hope it pays off with meat for your son.

the 356-120 or 358-125 work good for me.

There is no wrong choice.

The best way to eat a peach is straight from the tree fuzz and all.

Prayers for Hunter and his family.

That has always worked for me.

I have been using a Grasshopper with 60 inch deck to mow a little over 7 acres for 19 years. When it finally wares out I will get another one.

I don't think that the powders are crazy, some powders just have a much more limited range of application than others. As long as you don't try to use a powder for something it was not intended for...

I formed all my 270 Wby brass from 7mm rem. They will be 1mm short in the neck but does not affect the overall length of the loaded round at all.

I have used thousands of them with no problems.

If only basic equipment is used, and with a little looking around the equipment can usually be found used in good condition, the investment can be saved in ammunition cost very soon. If like most of...

Sounds very interesting and challenging.

I just use the 308 for forming mine. I run the 308 into a 300 file trim die and trim to length, then into a 300 size die and they are ready to load and shoot. Annealing first makes everything...

Very good!

The 7x65r is basically a rimmed 280 remington. You should be able to use 280 starting loads and be ok.

I have started working on a cast hunting load for my 270 Winchester. I have found very little information by searching the site and would like to know what is working for others.

Congratulations

Good for you.

If you used Paypal it is automatic.

Thanks for sharing your load. I will give it a try.