Search:

I am happy for your succes!!! Looks very good.
I am also happy to help any one make shot!!

But I am not on this forum often !!
so see website, view instructions , "CALL" or email me directly...

Cause folks wanted a less expensive machine and don't already have the mk65.....
And...... The mk90 is for some one that needs more shot per hour .....10 drippers, double spouts....
Market demand...

Yes, still working on three dripper machine!! Contact me directly. I want to avoid issues with mods. Thank you.

I wish it was something that could be dropped via any Shot machine!
Swaged. .20 and bigger only way.

We have a small sample of .175 but it Bismuth not lead. Not very round .
Can't say it is...

Shaune, yes they did......several years ago. Patents can be gotten around though too....seen it before, mainly over seas manufacturers, but US also....

I just make a superior product, enjoy...

No rebranding!
Magma and the other guy decided to make cheaper versions!

Littleton in continuos production since 1979.
Magma was my largest dealer, but they thought it should be less expensive...

Went to answer a question on thread regarding a potential new smaller shot machine and thread is gone??

Did I break rules once more?

If this wrong place to inform or help shot drippers I would...

Just saw a notice!!?!
Mp15 boltface spacing issues!!!

Stop shooting you mp15 and contact Smith asap!

Gun can go full with just a single trigger pull.

They will send out tool for you to...

Armourer Reloading in the U.K. has just place an order for a small batch of Shot Makers. These will come wired with UK spec. plug/cords.
As of now the Mk65 will be supported and these are exclusive...

This is a warning of what not to do!!
DO NOT TRY TO REPLICATE ISSUE- I will not send you a new pan or warrantee the Shot Maker if this happens!! Yes I can tell when I see the pan what happened ......

Jim

I was worried your production seem very low per hour…..
As with any tool- the operator is always the biggest variable ( other than the shop temps) . I hear about how folks have a hard time...

Jim
you are not going to get good shot until your shop area hit 60F or above.

I won't bother turning the machine on at my place until it was 65-75F if I want to get the right sized shot.

If...

Cooling the shot happens when it hits the Coolant tank filled with Liquid Coolant-
I was more worried about the air temps and wind.
the drippers need to be hot, any breeze will cool them and the...

Curious?
Temps at the time of loading made a difference??

I have seen the ammo be hot ( sitting out in the sun as example) or cold ( winter daus vs. summer day shooting) and shoot way off from...

issue Alice Pack, the extra big ( ranger style ) - Large version not that little ***- stuffed with gear I want when I go into the field…all the gear inside is packed in sealed plastic bags incase...

Off my back porch I use the fold out picnic type table from local camping store. folds ups and fits in my car trunk, light enough I can carry any where. Big enough for two shooters , small enough for...

Copper> when it gets hot- enough to let lead flow it will also start to leach out - not like it contaminates the lead, but as in it's soft. -
you 'may' have a hole for #9 shot and several pounds...

Tom. don;t take it personal.. what do they say- You can lead a horse to water but….

"we at the forum" give away info all the time, and still guys don;t want it, or choose to not listen and go...

I tell guys all the time-
IF you are just using the machine for a few boxes off dove or quail ammo then you never get your return,
but if you shoot 300# each year alone and you have a brother and...

Another question : how much shot do you need? How fast do you need it? if it's not perfectly round are you going to be happy??

One day about 20 years ago I thought I would build my own unit- then I figured out what my time was worth and how I would rather shoot than build up some thing from scratch that may or may not work...

WAIT!!! you are using Aluminum drippers??
been there DONE WITH THAT!

I have nothing good to say about those….al. drippers are not ideal.
Temp control won;t help in this issue- please...

Pure Bismuth expands as it cools…it does NOT expand evenly . Lead shrinks as it cools , it cools the same on all side - and is predictable-
Bi expands at an uneven amount. it looks like rough and...

No it's not LEAD, But I would like to begin a spot some where on the forum where I, and other shooters can post up all the useful info possible concerning BI. and Tin Alloys??

Not sure it is...

Not knocking what you are doing, just wanted to bring up the temps.
Use vs. Need. ,
he will need it for slugs so LOW melt might be the wrong thing to put in his idea list....

12% tin will...