Search:

I have not tried pistil cases but do anneal rifle cases. I use a alcohol burner that i made that heats just right for me.

No worry about to hot but heats fast enough to many cases at 1 time....

I have a Win model 92 but what I have read they do not recommend 256 in that gun.

As I recall the air rifle was attached to the boat. But that is only from memory.

I have had 1917`s in both 308 Norma & 300 Win. Both were grand old rifles.

I think most of the 1917`s that I have shot had very generous chambers. I did not FL resize when reloading.

I liked the case to take just a little bit of pressure on the final bit of the bolt...

I have reloaded 243 & 30-06 Perfecta cases with normal loads and good results.

If you are going to the range or shooting varmints take that workmate with you. Use a 2x6 or 2x8 between the jaws and long enough

to extend over on both ends. The best portable shooting bench I...

I have been there also. Mine needed some work on the trigger so I went for sending it to a smith. Glad I did It now has the best

trigger pull you could ask for.

If you think you might have a 250 sav. in your future save the 22-250 & the Creedmoor brass. They are the best to use in that conversion.

308 Win. brass is everywhere and is a snap to convert to...

Yes that will work. Since the 250 was the parent case for the 22-250 it takes it back to the roots. The Creed brass is more likely

To be found in my area, sometimes even on the ground at the...

We are seeing shooters lookin for 250 Sav. brass I have tried several different parent brass in my search.

I have settled on 1 as the easiest. It is the 6.5 Creed. One pass and you are done. ...

That was interesting

I have never found any Berdan brass that had a flash hole. All boxer brass will have a flash hole.

Odd's & ends of PVC pipe in various dia. standing in metal juice cans has worked well for me. The often used ones on the corner of the bench.

Other less used are stored horizontal on top of each...

Nice to hear about the green dot. I just came into a full pound last week.

Good info here. Hope it will save some pain.

I had some that the primer had a dent but the shell did not fire. I took a box cutter and cut the plastic just above the powder line.

I put the powder in a pill container and kept the section...

Yes the members have been more than helpful every time I have a problem or a question.

Thanks to all of you.

Thanks for the input guys

I use it in most every rifle I have for down loaded J bullets.

Alliant Blue Dot is a super powder for down loaded J bullets in almost every rifle I have.

I came into a 1# can of 800X and can not remember where it falls in the burning rate. As i remember it was a shotgun powder.

I cannot find loading data for it. Most shot gun powders also work...

Some one is " a young fella" I used AL-7 & AL-8 when loading 3" goose loads. I still have some and use it in rifle cast loads. They were great powders.

Well I am indeed blessed. I have a 99 that had the barrel set back and reamed to 300 sav. Not wanting that chambering I reamed it to

308 win. It shoots .308 well, but with .311 it is a very ...

Shipping live ammo is not that hard. I sent 22-250 VIA the little brown santa. It needs to be sent from their hub. marked as explosive and pay the shipping fee which was not that much more than a...