Search:

Sounds like maybe the primers are not seated all the way or lose primer pockets. I had similar problem. I did not seat the primers all the way. Just my 2 cents worth.

I use the noe 37 grain GC mold. I hi-tek coat them, load them with #9 powder at 10 grains. Very accurate out of my Rock Island 1911. They area little bit of a PIA putting GC"s on. I have not tried...

i just ordered one from them .. should be here the next day or 2..

Doug did 3 barrels for me, Excellent work and solved my problems. He has a quick turn around time.
Tom

catchbull@4 you sent me a pm but no message or address..:coffeecom

Doug done a few 1911 barrels for me. Excellent job on them all. Great service and a outstanding person. His prices are fair.

Cold water and soap.

I use 2 coats of the gold and it cover very well. I used the dark colors and use 3 coats to get a nice cover.

TCM 22 it just enough different from the 223 to be a real PIA. LOL

I started reloading TCM 22 on my loadmaster and was having the devil of time with the 4s shell plate. It was just to tight for some of the brass. I found some 223 steel brass at the firing range and...

I cast in my shop. I take a clear tote from walmart so the light can go threw it so I can see what I am doing underneath it. I hang I over my pot mount a bathroom fan on top of it and pipe it out...

Okay went out AND IT WORKED GREAT!!! No leading and very accurate maybe even a little better than the factory bullets. The 10.0 grains of NO. 9 was working great. That was using the GC mold from NOE...

My mac is still doing it. My cell phone does not.:groner:

1911 forum no problems or tcm 22 forum just castboolit forum.

Has anybody casted bullets for this little guy. I am looking the noe 37 grain mold. Thinking of Hi tek coating them with gas check.

I had the same thing happen on my 1911 Wesson. My problem was bullet not seated deep enough. Gun did not close all the way gave it bump to close not a good idea. Ruin only my clip. Brass look just...

I also anneal mine in lead. I set my pid on 710 degrees. I leave the primer in the brass. I use graphite powder on the neck of the brass. I took a small piece of flat iron and drilled holes in it to...

Savage just change their web site to 1/12. The dealer I bought the gun from also showed a 1/14. I am sure the gun will be fun I am just disappointed I really wanted the 1/14 since that what I was...

Bought me a new Savage 375 Ruger Alaskan Brush. They were advertised on the Savage web site with a 1/14 twist barrel. Well they have now changed their web site to 1/12 after me calling them and...

I seem to like to shoot the wires off mine. I do like the wood stand for sure.

WOW!!!! That is awesome work!!!! WOW!!!

Don't take this the wrong way but she starting to think that most men are idiots. But I do have a old 1975 f150 rust bucket 4x4 300 six cylinder and 4 speed transmission. Yes, still runs. She says...

Yes a semi truck for this wind. Great idea I will run it past the wife. Wish me luck. Well she called me an idiot. LOL

Yes I do but 50 mph winds here in Nebraska panhandle might even blow the table away hooked up to the jeep. LOL

Be awhile till I get it to the range due to cold weather and work.

Thanks for the pickup idea. I will just use the table top making a piece that hooks up in the receiver hitch to bring it back into the pickup box. Great idea. My son was giving me some ideas on how...