I’ll wash my brass using pins and a tumbler. I’ll then set them on a sunny place to dry. The summer Texas sun will anneal them while they dry. Lol
Printable View
I’ll wash my brass using pins and a tumbler. I’ll then set them on a sunny place to dry. The summer Texas sun will anneal them while they dry. Lol
I just built my own annealer. I use tempilaq on the inside of the case mouth and when it liquifies and turns translucent, then I know it is done.
I use this to see if it will extend the life of my brass. It doesn't take too long with a somewhat automated machine. About 6 seconds for a 30-06 case, so 10 a minute. That's faster than all of my other steps.
This is by far the biggest bang for the buck I have found for annealing cases. It works wonderfully.
https://www.youtube.com/watch?v=jLRgDZeYQ-M