There’s lots of different versions on YouTube to make yourself.
Printable View
There’s lots of different versions on YouTube to make yourself.
Another "tip" (ask me how I learned this one ;)) is to drill a small -- ~ 1.8" -- hole at any/all crack ends. Wash, then flush the cracked area with alcohol, rough surface with medium/fine sandpaper, and then apply epoxy -- making sure drill holes are filled. (I used a toothpick as an applicator). The drilled holes both help anchor the epoxy -- I used Gorilla brand (Amazon)) and keep the crack(s) from continuing.
Good luck!
geo
Yes, drilling the holes at the ends of a crack in metal will stop the crack from running any further as well.
Hey Frugal is my middle name. I like improvised.