Printable View
Yet another piece of that "larger deal", that I don't know what it's for:
Attachment 310084Attachment 310085
This item is about 12" long, and solid steel. The big end is clearly a handle. The hole 2" from the other end is about .190" (takes a #12 drill bit, but not a #11). There's an Allen head screw at that end, to tighten things up, so it would grip something round and ~0.190", or flat and ~0.080".
Is it a heavy duty tuning fork? (Naaah. :roll:)
Thanks for looking! :)
Nail puller, nail slides up slit to, hole where nail head is held as the bar is lifted to pull the nail.
If the sides are radiused, My bet is that it is a tool for lapping bolt raceways on bolt action rifles. Used with a strip of suitable grit sandpaper to smooth out the sometimes very rough military actions.
Robert
That's it!
Those interested can find out more by web searching for "bolt lug raceway polishing tool" or "receiver way polisher". This one looks like the Wheeler (as seen on the Midway web site).
Thanks! :)