Printable View
While looking for QuickLOAD alternatives I found a free web based simulator. I searched and could not find a thread about it here and thought others may find it of interest.
http://www.bbt.scot/ballistics/index.htm
It seems to have good data, from what I can tell. Perhaps someone with QuickLOAD could do a quick comparison to vet it.
Does anyone have any experience using this simulator?
Looks interesting! Thanks for the link.
Thank's Tim.
Thanks it appears to be pretty accurate checking a few different loads
A quick calculation with 3 different .308W loads as measured with the Oehler M43 PBL which have proved consistent with published data. shows, with this program, about 10,000 less psi and about 100+ fps lower velocity. Will do further comparisons.
The problem is the simplistic program is just a calculated guess and does not consider variations such as lot to lot of components, Variation and wear in the bore. Ambient temperature, etc.
Look for GRT, free QL type that you download. Appears to be good from my testing.
Thanks
Thanks Larry! Your comparison with .308 is very helpful and identifies potential shortcomings.Quote:
Originally Posted by Larry Gibson
I am interested in using it to narrow powder and cartridge combinations. It might be useful for rough comparisons and saving some reloading components.
Tim
Thanks popper, I will look into it.Quote:
Originally Posted by popper
Looks interesting, many thanks!!
YAY!!! GRT has a linux mint build as well! QL runs very well on linux once wine is installed, advisable to install wine fonts also, or you might get an error saying QL installer can't find a certain MS font it looks for, wine fonts will give it that font, or you can simply change to a font already in linux and the installer will proceed.
I will load the GRT software just to see it run and get familiar with it, have components but not in any hurry to start using them.
I am assuming GRT needs wine, but the notes for install give the specific 32bit libraries it needs and shows the commands to install them. I'm glad they picked linux mint and used a very recent version of it for GRT...Quote:
HOW TO RUN GRT ON LINUX
To run GRT on a 64 Bit linux, you have to install several 32 bit compatibility
packages first. Please read the installation notes in the manual. The PDF
version of the manual is located in the folder doku/pdf/
If the application still doesnt work on your distribution of linux,
unfortunately i can't help you, because there are just too many distributions
out there, i am not a linux expert and the development host of GRT is windows.
Thank you, Gordon
Attachment 281450
I tested P-Max with 4198 and H322 in .30-40 and found it tracked pretty well with my chrony results. But I listen to Larry's comment about pressure estimation and wouldn't trust it for Maximum loads. It seems a useful tool for moderate Lead boolet loads though.
Thanks for the link! Since I'm running Linux Mint I'll look into GRT too!
I tried to register for GRT but couldn't???
That is my takeaway as well. My Linux machine died and I have not tried GRT yet.Quote:
Originally Posted by Krag 1901
Played with P-Max this morning with the .308, 155-200 gr boolets, and my available powders. Sounds good compared to my chrony results. A nice additional feature might be to enter rifle weight and out put Recoil velocity/energy?
Today I noticed an e-mail from GRT that gave me a password to my registration! Hooray! Am downloading the Linux based application and will install it to try it out.
The problem with P-Max is the limited powder selections and lack of pistol info. Hopefully the GRT is more flexible but looks more complicated to learn!