Originally Posted by
indian joe
First thought --ya musta wanted it to fail ---seriously!
pan lubing is 100% reliable , quick and easy
make a push through cookie cutter
get a bottle neck case the right calibre , neck expand it oversize, bell the mouth, cut the rear end off, drill a piece of broom handle so the rear end fits in and it makes a T handle . its comfortable to use and greased boolits come poppin out the top every time you push it down,
The other trick is once you cut em out of the pan the first time just reload new boolits into the holes and heat the whole thing up with a hot air heat gun - only takes a couple minutes compared to messin round with double boilers ona stove. I always melt lube with the heat gun its way heaps quicker than the double boiler but still dont burn the lube (which is main reason for the double boiler ina first place) ..,
this stuff can be simple and quick if we think a bit - but theres a mountain of good advice goin around that gets us slow and difficult ................................