Originally Posted by
3006guns
No, I did not ream the case necks and that was an error on my part, so I apologize for forgetting to mention it. As for the boolit, I used an old Lyman mold that dropped 90+ grain boolits right at .319..........but I'll be darned if I can remember the mold number!
As for getting the sized brass out of the 30-30 die, not a problem, it drives right out. Just remember to shove that LUBED case all the way in to the hilt.
I was going to use 357 Sig brass also, but couldn't find any. However, our local PD just finished a practice session trying to hit the broadside of a barn (from the inside), so there were scads of .40 S&W laying around. It worked.