1 Attachment(s)
ReRun - Mihec 359640 158gr HP or 170gr Solid Dual Crimp Groove
LAST Call on 03AUG2020
MiHec 359640 Cramer HP in 2 or 4-cav HP or 6-cav solid brass or 8-cav solid aluminum.
Here is the original GB done by the Designer, Bob (45.2.1) http://castboolits.gunloads.com/show...Buy-INTERESTED
With Miha's permission and a big Thanks to the original designer 45.2.1 we are going to run this group buy again. This is has been run 5 times and everyone has raved about this bullet!!
It shoots well in everything I have ever shot it in from my N frame to my SP101 and my lever guns. This is a very accurate and great one bullet, for all occasions mold!!!
This is a dual use 357 boolit, the top crimp groove is for the short N-frame S&W 357 cylinders and the bottom crimp groove is for the 38 Special and long 357 Mag cylinder wheel guns. Meplat to crimp groove is 0.318-in and 0.357-in.” Weight is approximately 158gr HP and 170gr solid. I have a solid version of this mold and it casts 0.359-in with WW and 2% tin. Standard Lee 6 cavity handles will work. Miha also offers his higher quality handles too that can be added to the order.
Here is a little eye candy to look at from past runs.
This buy is going to offered in -
Attachment 242269
Cramer Pins included: 1) Large HP, 2) Penta HP, 3) Small HP, 4) Cup HP, 5) Blank pin for flat nose
- 2 Cavity HP all pins included 95 Euro's (80,75 with discount)
- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)
- 6 Cavity solid Brass 95 Euro's (80,75 with discount)
- 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)
The above prices include discount!
If there is interest in Hi Tek design we can do that too we will leave it up to demand.
The price will be converted to dollars at the time of invoicing thru paypal and the discount will be applied then.
If you do not do paypal contact Miha directly and he will work out the details with you.
This buy is set up to go into last call at 20 molds and then it will close when Miha calls it. These runs take a while some times and patience is required he has done a lot to speed up production with a bigger facility and more equipment but it is still a time consuming process and let's give him some grace to make these fine molds!
No one else is producing a Cramer style mold with these kind of options for pins and the price!
This group buy is set up with a 15% discount it is applied at the time of check out.
He is still closing out some molds on his web site but those are for in stock molds only to help make room on the shelves......
Sign up list
2-cav HP in Brass
1)
2) (soflarick) - 2-cav HP all pins - soflarick at bellsouth . net
3) (saturn) - 2 cavity, HP all pins - saharahg@yahooDOTcom
4) (dimaprok) - 2 cav, HP, all pins - dimaprok at gmail dot com
5) (bronte454) - 2 cav, HP all pins - thadd3220 at yahoo dot com.
6) (BHiggins) - 2 Cav, HP all pins - bhiggins @ bcahs(dot)com
7) (Hardtail) - 2-cav HP all pins +handles - phett1958 At gmailDOTcom
8) (xiholdtruex) - 2 cav HP with all pins - xiholdtruex at gmail dot com
9) (cephas53) - 2-Cav, HP all pins - cephas53 at windstream.net
10)
4-cav HP in Brass
1) (Rancher1913) - 4 cav HP brass - rancher1913 at yahoo dot com - Zip 80701
2) (Michael J. Spangler) - 4 cav HP Brass - spanglerknives at me dot com - Zip 02719
3) (Lakehouse2012) - 4 cav, HP - sorgatz At ameritech d0t net - Zip 48442 (Honcho)
4) (pahrumpcaveman) - 4 Ca HP all pins included - m1shooter2 at hotmail
5) (ryan) - 4 cav HP Brass - dearborn416 AT yahoo DOT com
6) (spur0701) - 4 cav brass HP, plain base - Jeffery.Thorpe@verizon dot net
7) (Greg S) - 4 cav Brass, with all pins - gp spero 64 @ g mail dot com - 97302
8) (glockky) - 4 cavity HP, all pins + handles - twgrubb3 at g mail dot com
9) (ChuckjaxFl) - Needs 2 sets of pin ONLY of HP pins - (ChuckJaxFL) - chuck dot falls at gmail dot com
10) (salty dog) - 4 cav HP - va dot griz at gmail dot com
11) (Michael J. Spangler) - 4 cav HP Brass - spanglerknives at me dot com - Zip 02719
12) (big bore nut) - 4 cav HP all pins, GC in the largest diameter offered - greggoryashley AT yahoo dot com
13) (Eddie17) - 4 cav HP with all pins, FB - SS fasteddie at m s n dot com
14) (Stmtrn) 4-cav with all the goodies - Bbenj1967@g maildot com
15) (Txcowboy52) - 4-cav HP Brass - ricky_taylor62ATYAhooDotcom
16) (drfroglegs) - 4 Cavity Brass HP with + handles. - Drfroglegs at yahoo dot com
17) (bushog) - 4 Cavity HP, - boo-haaa at hotmail dotcom
18) (Pepe Ray) - 4 cav HP with all pins, +Handles - addiel at myottmail dot com
19) (Andy45) - 4-cavity UP with all pins, plain base - Laszlo nh at Comcast dot net
20) (Bigbore5) - 4 cav brass hp +handles - Waynehager5 AT gmail DOT com
21) (Billwnr) - 4 cav, HP with all pins + Handles - sbwarner at nctv dot com.
22) (cja245) - 4 cav HP mold with all pins, +handles - cja245 at gmail dot com
23) (Sc0) - 4 cavity HP brass all pins + handle - I v t d i at y a h o o dot com
24) (dalek) - 4 Cavity HP all pins - raubvogel on gee-mail
25) (GL49) - 4 cav HP, all pins - larrybohn at ashlandhome dot net
26) (kingstrider) - 4-cav, hollow point with all pins - overunderhunter at yahoo dot com
27) (monkey wrangler) - 4 cavity brass HP with all pins - mgehlen mesa At aol dot com
28) (rototerrier) - 4 cavity brass HP with all pins - p d a n 2 9 9 3 over at the g mail
29) (Duke3026) - 4cav brass all pins - Duke3026 at gmail
30) (DanInCt) - 4-cav brass all pins - Dan Eschner at Gm Ail dOT Com
31) (475AR) - 4 cavity brass with all pins - sddeem AT hotmail Dot com
32) (Trimjoe) - 4cav brass all pins - joeolin13 at gmail.com
33) (Bucko) - 4 cav, all pins - laedco58 at gmail.com
34) (ShootNSteel) - 4 Cav HP all pins - jmakosky16 at g mail dot com
35) (1I-Jack) - 4 Cav HP all pins included +handles - nw_trader at hotmail
36) (AZBrian) - 4 cav, HP, NLG +Handles - brian.dinse at yahoo dot com
37) (CoolHandMoss) - 4 cav brass, all pins +handles - Atobwill at gmail
38) (RT4406) - 4 cav HP, all pins, NLG - RT4406 at aol dot com
39) (rcn11thacr) - 4 Cav HP, NLG, +handles - Redoldspot at gmail dot com
40) (Smokedog2) - 4 cav HP brass, pins +handle - jeffm004 at gmail dot com - Zip 45042
41) (dperk) - 4 cav, HP, all pins - fuelinjected -at -gmail
42) (johnfl) - 4 cav, HP all pins - wind 28631 AT gmail dot com
43) (Double D) - 4-cav HP all the pins - l t c d u g g i n s (AT) gmail dot com
44) (FLYCUTTER) - 4-cav, HP, FB, w/all pins -RunderscoreKARKatATTdotNET
45) (TimD) - 4-cav, HP all pins, + HANDLES - kc2skg AT gmail DOT com
46) (Jlw6636) - 4-Cav HP, all pins, NLG - Jlw6636 @ sc Dot rr Dot com
47) (Wasalmonslayer) - 4 Cav HP, NLG - Max at yvmarine dot com
48) (osteodoc08) - 4-cav, HP all pins - t om ga rcia 15 at yahooo Dot CoM
49) (dg31872) - 4-cav, all pins - dgd dot 72 dot 2011 At g mail dot Com.
50) (pack3480) - 4 cav HP Brass all pins, NLG +handles - dcasad(at)hotmail(dot)com
51) (Kelz213) - 4 Cav HP all pins - Spr 02 que at gmail (dot) com
52) (Keith429421) - 4-cav HP all pins - dannybritton at att . net
53) (Capt.Red.44) 4 cav, brass, all HP pins, PB +handles - Capt.tipton at G Mail. Com
54)
55)
56)
6-cav Solid Brass
1) (redhawk357mag) - 6 Cav, - redhawk357magATgmailDOTcom - Zip 73533
2) (bushog) - 6 Cavity solid Brass - boo-haaa at hotmail dotcom
3) (DW475) - 6 cav solid, brass - dcw038 at msn dot com.
4)
5)
6)
8-cav solid in Aluminum
1) (ChuckJaxFL)- 8 Cavity Alum - chuck dot falls at gmail dot com
2) (Olsmoky) - 8 cav alum, NLG - olsmoky95 at gmail.com
3) (Olsmoky) - 8 cav alum, NLG - olsmoky95 at gmail.com
4) (KVO) - 8 cav alum, NGL - Bulls (underscore) Eye (underscore) 264 at hotmail dot com
5) (JAMESGR) - 8 cav alum, +handles - bri1590@charter dot net.
6) (AZBrian) - 8 cav alun, NLG, +handles - brian.dinse at yahoo dot com.
7) (pack3480) - 8 cav Solid Alum, NLG +handles - dcasad(at)hotmail(dot)com
8) (pack3480) - 8 cav Solid Alum +handles - dcasad(at)hotmail(dot)com
9)
10)
11)
12)
