Has anyone found one that works. Mine is Hornet, but I suppose that if there is one that works, it would work for either Bee or Hornet.
Printable View
Has anyone found one that works. Mine is Hornet, but I suppose that if there is one that works, it would work for either Bee or Hornet.
Basically you could get a length of either nylon or delrin. and a short section of brass rod about 1/4" in diameter. Drill the nylon or delrin for the cleaning rod. Then with the rod set into the action, mark where it clears the rear of the bolt opening for the brass rod and tap the hole and rod for 1/4"x20 threads per inch. Frank