I recently found a Parker Hale Whitworth (see photo) and am trying to find the best Whitworth bullet mould I can buy.
Please let me know your opinion.
Thanks,
Orin
Attachment 294654
Printable View
I recently found a Parker Hale Whitworth (see photo) and am trying to find the best Whitworth bullet mould I can buy.
Please let me know your opinion.
Thanks,
Orin
Attachment 294654
Perhaps something like this..................
Attachment 294665
Rick,
That's a cool mold that you've obviously made, but not seeing that one on your site. Any chance you could elaborate any?
7.62,
My father treated himself to a Whitworth replica when he retired, and he got the cylindrical brass mold with the rosewood handles and the hollow base insert so you can stuff the tail end of your paper patch into the cavity.
Granted, it was among the very first molds we ever bought and it's configured to be about the most difficult style there is to cast with, but it's definitely one of those items that requires three hands to use, makes a lot of rejects, and makes you think "There's GOT to be a better way". It does, however make a decent bullet when you get it right.
Rick's design would get rid of the nose cut sprue of that cylindrical mold, and make casting of a clean base much easier. You'd have to reconfigure your paper patching to eliminate the tail, but this would probably be a better system for seating down on top of a felt wad anyway.
I've also seen pics of hexagonal bullets with conventional lube grooves that obviously need to be a bit bigger in. . .diameter?. . .girth?... to eliminate the paper patching. Since I'm unaware of a hexagonal die for a Lyman or RCBS lube sizer, I'd guess that's a messy process. Still, I'm intrigued by the notion and hope someone chimes in on it.
Are the hexagonal paper patched or lube grooved bullet inherently more accurate than those loaded round?
Seems to reason they might be but I don't know so again, hoping someone chimes in.
My fast twist .45 is really a .458 seven groove made to shoot 45-70 molds so yeah, me I don't know about hexagons.
When you fire cylindrical bullets in a Whitworth they need to be pure lead to bump up. Advantage of hex bullets is they can be significantly harder since they fit already.
Ah ha. Now there's a tidbit I'd never thunk at.
I prefer as soft as I can get by with so too hard just doesn't cross my path.
When I bought mine it came with the mold, round w/ grooves, a swage to size, and the punch for the hex shaped wads. Traded it years ago.
swamp
I sell Rick's Hexagonal Whitworth moulds here in Australia for him, I've sold a few of them since they became available. Everyone tells me their Whitworth's (or replica's) have never shot so well before.
Rick's mould is the better of the two currently available hexagonal moulds, as it is far better dimensioned to work properly.
Buy one off Rick and go and have some fun would be my suggestion.
DC
I have asked Rich to place me on his list for one of his moulds.
Rich @ KAL,
When will the mould be shipped?
I asked you to cancel the order but said you would not cancel the order and said it would be mailed on March 21st.
So, has it been shipped?
Orin:
The mould you ordered has been shipped.
BTW, airing your dirty laundry on an open forum is not the best place to do so.
RRR
If it's been shipped then send me the tracking number
@ 11PM TODAY -
Just received this message, after I was finally sent the tracking number, from USPS -
Status
Label Created, not yet in system
So, it hasn't been shipped even though I was told it was to be shipped on the 21st.
Guess it's just laying around the shop.
If you do not want the bullet mold, PM me, I will take it.Quote:
Originally Posted by 7.62x51
Kevin
Attachment 298404Quote:
Originally Posted by 7.62x51
The mold has been made, and shipped. The thread is now closed.