-
I have 7 I think.
LEE Classic Cast single stage.
RCBS Rock Chucker w/ Piggy back 2
LEE Deluxe Turret press ( snicker... hehehe he said Deluxe)
2 Lyman Tru-line jr turret presses.
Hornady Projector
MEC 600 12 ga reloader.
Plus a Star lube sizer and a RCBS LAM
-
Old timer & old presses:
Texan turret press
RCBS rock chucker
Texan shot shell - manual
Texan shot shell - progressive 12 ga
Texan shot shell - progressive 20 ga
pacific 366 shot shell progressive 12 ga
Hornady LNL AP cartridge w/case & bullet feeder
-
Lee "O" frame for GC/primer seating and other various tasks, Dillon 650 for 45Colt, 5.56 and 7.62, LNL AP for .41 Rem Mag, .44Mag, 45 ACP and 9mm, Rockchucker for precision rifle reloading. MEC 9000 for 12 ga and Lee 12ga loader for "Special Purpose" loads. Couple of Lee hand reloaders in the "travel" kit. Like JonB I've got a bunch of special purpose lubesizers too, but that's for another survey!
-
A Dillon 550B, two Rockchuckers and an RCBS Partner, and a Lyman 310 for .45-70
dale in Louisiana
-
4 dillons
2 MECs
1 Lee classic cast
-
1loadmster, 1 lee 4 hole turret, 1 of the small lee c shaped presses, 1 lee load all, 1 mec size master.
-
Too many to count.
Dillon RL550B
At least 2 Rockchuckers, if not more
At least 1 Lyman Spartan, if not several more.
Numerous Lyman 310 tools
Many Wilson hand sizers/hand seaters
A smaller RCBS press
Corbin CSP-1 bullet press
-
I currently have:
A Dillon 550B, 2 SDB's But I may sell them since the 550 will do what they do.
An old Rock Chucker, A C&H 444, a PW Metal Matic II, and a Lee Hand Press.
For shotguns I have a Pacific DL266 in .410 a DL 266 in 12ga, a DL366 in 12 ga, and a Spolar. And as of yesterday a Lee Load All.
I could get buy with the 550B and the Rock Chucker and a DL266, but it's nice to have other options.
Randy
-
total: 11
6 mec 600JR V (two 12ga, one 20ga, two 28ga, one 410)
4 mec sizemaster (two 20ga, one 28ga, one 12ga)
Redding t7 with 3 extra rotary heads (currently set to load 38 special)
-
2 for brass
3 for shotgun
-
Let's see...
Co-Ax
CH Champion (mostly for swaging; some heavy sizing my Co-Ax doesn't like)
Hornady Pro-Jector (40 S&W)
CH Auto Champ; Mark IV (9mm) and a Mark V (45 ACP)
Lyman Acculine (dedicated to Lee hardness tester)
Hornady 366 w/4 die heads (.410, 20, 16 and 12 ga)
Hornady Apex; originally 3.0s. Both upgraded to 3.1s with gas assist (20 and 12 ga)
Hornady Apex (original); dedicated to 12 ga buckshot with a shot counter
Pacific Dl-155; .410
Pacific Dl-266 X 5 (20 ga 2 3/4 and 3", 16 ga, 12 ga 2 3/4 and 3")
Pacific DL-105 X 5 (20 ga 2 3/4 and 3", 16 ga, 12 ga 2 3/4 and 3")
21
-
1 RC
1 RCII
1 RCBS Partner
1 Pacific 12 ga ( its old)
1 MEC 20ga Sizemaster
1 MEC 600Jr 12 ga
1 MEC 600Jr waiting for the 16ga swap it has a couple 12ga parts missing.
-
8, 2 Dillon 550B for eveerything not black powder, 2 Co-Ax for load development and small runs of seldom shot ammo, 1 Redding T7 for .45-70 Black Powder, 1 Herters C press which I don't remember the model but is mounted upside down and used for push through sizing, 1 Rockchucker for gathering dust under the bench and an arbor press for wad cutting, gas check manufacture, bump up bullet swageing plus any thing else that needs squishing.
-
Looks like I'm right in the average?
1 Dillon RL550B
1 Lyman "All American"
1 Lyman Spartan
1 RCBS "RS"
2 MEC 600's 20 & 16ga
1 Texan 12ga
I do have a Lyman 450 lubrisizer too.
Does my HF 10ton H frame count?[smilie=1:
-
4 for me.
2 MEC Sizemasters (12 & 28ga) - looking for a nice used 20 ga.
2 presses for metallic: my first press bought in 1981, and the most used on my bench, a Pacific Multi-C single stage and a Dillon SDB (4 caliber conversions).
-
1) Lyman All-American Turret set up for 30-06
2) a little Lee Reloader C press for small odd jobs
3,4,5,6) Lyman Trueline Jrs, one set up for each of the handgun cartridges I load for (32 H&R, 38 Spcl, 45ACP, 45 Colt). I mount these to the bench as needed with C clamps.
7) A Lee Classic Cast Turret for everything else (half a dozen rifle cartridges)
There are 6-8 Lyman Ideal 310 tong tool handles as well, but I didn't count those.
-ktw
-
One challenger, one hand press. I can load waaay more at night than I get days off to shoot em. :violin:
-
4 on the bench right now:
Hornady LnL AP
Lee Single stage
RCBS Jr Single stage
Lee Load all in 12ga
-
Well now I feel much better,(less guilty) about the # of presses I own. Seems I'm not the only one with the "just one more" addiction.
-
hornady single stage
hornady lock and load
lee hand press