I really want to get a Freedom Arms revolver
are they worth the money?
I would choose either 45colt or 44 special.
I am done with the hard recoiling wrist snappers
Printable View
I really want to get a Freedom Arms revolver
are they worth the money?
I would choose either 45colt or 44 special.
I am done with the hard recoiling wrist snappers
"Are they worth the money?" That's something only you can answer.
Based on your post you are looking at the Model 97 the smaller frame FA. Prices are getting pretty high -- some one on another website said current price on the below gunbroker linked 44 special is over $3,800 with all options and an 18 month wait. The octagon bbl, round butt and ivory colored micarta grips (which are no longer available) add a grand or so in options.
.
https://www.gunbroker.com/item/968470882
.
Here's my pretty much plain jane (other than flutes) 44 special -- current list price is $2,800 and a long wait (street price and availability will differ of course).
.
https://photos.imageevent.com/paul10...l_IMG_4604.jpg
.
Paul
They are the most accurate revolvers I have ever shot. But the are not worth it to me. I am not able to use them to their fullest advantage.:cry:
Try a BFR in a pistol caliber. We have a .454 Casual and a 475 Linebaugh. Both very accurate.
Well my favorite revolver is a model 555 in 50ae. Was/is it worth it...to me absolutely
There is a huge difference in size and weight between a BFR and a FA97 (approx weight for similar bbl length/cal FA97 36 oz, FA83 50 oz, BFR 59 oz) - OP wanted something with smaller with lower recoil
OP Quote:
I would choose either 45colt or 44 special.
I am done with the hard recoiling wrist snappers
Here's a crappy picture of a full size FA 83 and the smaller FA 97 -- the BFR is even bigger than the full size FA83
.
https://photos.imageevent.com/paul10...pse6913976.jpg
.
Paul
I shot a Ruger Blackhawk in 45 Colt for a bunch of years. Eventually I hit a plateau with it and wanted something better. I was looking at some of the high end gunsmiths (Bowen, Linbaugh, etc) for something more tightly put together (tighter chambers, line bored, etc) but eventually realized that just buying a Freedom Arms would be both a cheaper and faster way to get there. I sold the Blackhawk and picked up a FA97 in 45 Colt/45ACP. They were going for around $1,600 at the time, with the extra cylinder. It was a lot of money but I am glad I spent it. Biggest downside is they only come in stainless. If you can get past that they are fantastic shooters.
-ktw
Size comparison with SAA (USFA), both in 45 Colt.
Attachment 310030
If anything they make more sense now than ever. Rugers and S&W's are going for over $1000. BFR's are over $1500, customs are well over $2000. Yes, $3000 is very steep for a handgun still. If you really want it though, sell a couple you don't like, and you are most of the way there.
Have got several 97s and 83s and yes, they are worth the money and you will be quiet happy...
As to caliber, the 97 is the perfect vehicle for the .44 Special...it is like they invented the gun around it. One can run anything from 180 grain WCs to 280 grain LBTs at whatever speed one desires...you aren't going to hurt the gun.
As to barrel length, for all-around use the 5.5 is great... If you like them short then the 4.25 with a round butt is as Mr. Taffin states, the perfect Packin' Pistol...
There used to be 100+ available at the various auction sites but right now the pickings are slim especially when it comes to 97s. The factory went from a 3 month wait two years ago to a 9 month wait last summer to 18 months now...I expect them to go to two years by the and of the year.
Most of the used guns out there are in excellent to mint condition...for a 97 in .45 Colt or .44 Special with a round 4.25-5.5" barrel expect to pay $2200-2500 in this market.
Best place to shop is GunBroker and GunsInternational. Both have new and used guns on a regular basis...
Expensive but you get more than you pay for...
Bob
I have two, a 44 special and a 45LC/ACP. Had them for 20 years or so. They were expensive even then, but I have never regretted buying them. Of course, I was a working man back then rather than the poor Viejo I am now. :)
I have had a BFR/ not to my liking
I bought my FA-83 in early 1984. It is chambered for a 454 Casull and since I had my gunshop at the time I had them fit it with a tungsten insert in the forcing cone (no longer available). I have killed over 141 animals with it and my records indicate it has over 9,500 rounds through it (33.0 296 behind a 300gr. LFN), it is still just as tight as the day I got it.
It IS worth it!!!
Are they worth it? In my humble opinion,, YES!!!!!!!!!!!!
Top quality, & basically hand built by real gunsmiths.
As to caliber,, I'd opt for the 45 Colt over the 44 mag,, but that's MY personal preferences.
I shot one last week. You can load a 44 mag from low to go.
I have several FA revolvers. Almost any load shoots well, with the right loads , SCARY! Just last week I was playing with a new bullet in 475line, my buddy watched 5 350gr bullets went into 3/4”@50yds.
Other guys mentioned M97 in 44spl. I have a 6.5”. It weighs 40oz, it’s handy.Throw a scope or red dot on it , it becomes a 100yd deer gun!
BigBoreShooter
I do not mind the weight. We I decide to push a heavy for caliber cast my 140 pounds actually appreciates it.
Chest holster takes care of hunting carry.
If you have the cash and want it them buy it. If you are just looking for accuracy, then buy a BFR. The BFR will be a 8.5 on the build scale, the FA a 10. However, the BFR will be just as accurate as the FA.
not for me had the 4 5/8 454 , i think a 83,, magnaported ruined it should have stayed to 45 colt,, i wouldnt buy another
I have a Model 83 chambered in .357 mag with 7.5” barrel. I had to send the cylinder to Dougguy to have the throats fixed, 4 were super tight and one loose. He opened them all up to .3585”, I don’t have a flyer from that one chamber anymore. Now it is a laser beam with all 5 chambers, the 1:14 twist lets it spit 220gr boolits with amazing accuracy.
Being able to load .357 up towards 60kpsi puts that cartridge into a whole different universe vs 35kpsi. The FA cylinder is 1.776” so when I load up FA only ammo, it’s loaded to just under 1.776” so it won’t fit into any other .357 I have.
I’d suggest looking at one in .357, you can load up wrist snappers if you need, but with standard magnum loads the recoil is a bit easier to manage than say a 6” GP100 and a lot easier than a S&W 4” 27-2.
I have an 83 in 454. And yes it is worth the money. I also have Blackhawk's in 44 spl and 45 colt. On the 44 the BH is as accurate as the 83 is. The 45 colt not so much. I doubt I would spend the extra money for a 44 spl but the colt or a 44 mag I would if I needed that little extra in accuracy or intended to shoot extra heavy full snort loads. It really depends on your own personal needs. I needed the 454 to be super accurate and tough, That's why I bought it. I don't need my other single actions for top tier nor do I load them to that level. My 44 mag redhawk will kill anything I want out to my self imposed limit of 100 yds. Will a FA do it any better. Yes but is that extra margin worth 3 times the price to you.
Don't get me wrong, sometimes I want the best and if I can afford I buy it and it makes me happy to own it, need had nothing to do with it. If and when I get into higher pressure rounds like the 454 then I would consider another FA or might try a BFR.
To answer your question, 44 spl=no, 45 colt=yes if I was shooting Ruger only load levels and no if shooting standard level.
Have fun on your journey.
Tony
would be looking at the 45 Colt capable of JL loads
I went down that road with Ruger and never got the accuracy I wanted
I really like accurate guns as I am getting older and time is getting shorter
settling for less than what I want is not an option
Several years ago(2006) I ran across a FA 83, used with 2 extra cylinders in .45 Colt and .45 ACP. The price was right. Turned out the gun was well used but tight as new. Since then I have added .45 WinMag cylinder(don't ask why). I've shot very few round of .454. Age wise I'm just not up to it and have no good reason the punish myself.
In 2021 I decided that a FA97 in .44Spec was what I wanted(notice I did NOT say needed). I've been more than satisfied. I didn't consider the price out of line even though it was half again what I paid for the 83. 17 years inflation really makes it cheaper to me.
I hear you and right there with you. I hate owning a gun that I can't get out of it what I want. They go down the road pretty quick.
The only thing about the 83 I don't like is the recessed cylinder, Load one skip one load four. That gun is so tight after loading the last round, do not let the cylinder rotate much or it will skip the empty cylinder on the hammer let down and you cannot see the rims. On my last cylinder I just barely bring the cylinder into view, slide the cartridge in and close the gate. that cylinder needs to stay on the high side of the gate cut-out.
Tony
One weak spot to note on FA 83s and 97s...the firing pin... For whatever reason they WILL break if dry fired with no snap caps on board. I have not had it happen to be because I shoot my SAs with all the beans in the wheel. But if you are one of those people that carries/shoots a SA with an empty chamber it would be worth while to put a snap cap in the empty chamber in case you loose count...
FA does sell a firing pin replacement kit with firing pin and bit driver for the firing pin bushing...
Bob
.41 Magnums 97s...5.5" and 4.25"...
https://www.24hourcampfire.com/ubbth...ull/120929.jpg
.41 Magnums 83s...6" and 4.75"...
https://www.24hourcampfire.com/ubbth...ull/120931.jpg
One thing you may want to consider...there is a difference between intrinsic mechanical accuracy and what I call "shootability". Every FA revolver that comes out of the factory has a test target that shows its mechanical accuracy. The question becomes how much of that intrinsic accuracy can each individual wring out of that gun.
It is not only ones own ability but also things like how the grip fits, how the trigger breaks, the amount of recoil generated and how the shooter handles it with that particular gun...
I find the FA grips fit me and handle the recoil for me better than the Colt SAA, Ruger XR3, XR3-RED, Bisley or SBH. Others like one over the others...others hate the 97s...there is no right answer...just the best answer for you...
Of all the SAs I have that little 97 .41 Magnum with the round butt is the most UNFORGIVING of any SA I have ever fired. If I don't concentrate on every shot I miss...but yet it is one of my favorites... The 97s are smaller than a Ruger mid-frame Flat Top which is the smallest Blackhawk size frame Ruger makes...
If you can I would try to at least get the model you want in your hand to see how it fits...
Bob
I have a 4 5/8" Model 83 in 454. I have also been able to shoot Model 97's in 32 H&R, 357, 45 Colt, and 83's in 357, 44 Mag, and 454. You cannot get a better quality gun from most custom gunsmiths. It hurts when you pay for a Freedom Arms, but the quality & accuracy will amaze you. Freedom Arms revolvers also hold on to their value well.
Get your first one in a standard revolver caliber so you can try to wear it out.
Very well made revolvers. I had one in 454 once. I got over the 454 and sold it. Now I have customs built by JRH and others worked on by Bowen. I know they are Rugers, but I can’t really tell the difference. I don’t plan on parting with any of them. What’s the saying, “buy once, cry once,” that sums up the FA experience. You won’t regret it.
I have a Silhouette gun in 357. Would like a shorter barreled gun with a 9mm cylinder or a 45 with an acp cylinder. Do like taking it out to the range and shooting our bear gong @350 yds. If the wind isn't blowing, I can often get it 3 out of 5, sometime 4 out of 5, but never (yet) 5 out of 5. Others just shake their heads, not believing a pistol can be so accurate.
LGS had a magnaported 454 I thought about. It was $1,500 and in good shape, but someone stuck pachmayer grips on it, which I detest. Passed on it, but went back to look at it again, and it was gone.
Another LGS has a 41 mag. which I think is NIB. 4.75" bbl, IIRC. Think its $2600.
Have two BFR's, a 30-30 and a 50 AE, both good guns, but I prefer the FA
My father bought his .454 around 1989, and it's about as finely made a firearm as one could ask for, and you're unlikely to have to deal with adjusting barrels for frame crush and cylinders for correct diameter. .44 Magnum would seem the no-brainer choice for you - more brass options than the Special and there's no reason you have to load it hot.
Only negative for me on them is I've gone DA on revolvers to the point of pretending that the single action notch doesn't even exist.
My wife gave me the green light to get a Freedom Arms 97 in 2020. I bought a premier grade 327 and have been very happy.
white eagle...you never have said if you are looking at the Model 97 or 83....
97s come in .45 Colt and .44 Special...
83s come in .454 with an optional .45 Colt cylinder or .44 Magnum with an optional .44 Special cylinder...
"LGS had a magnaported 454 I thought about. It was $1,500 and in good shape, but someone stuck pachmayer grips on it, which I detest. Passed on it, but went back to look at it again, and it was gone."...rockrat...that was probably a Field Grade 83...they used to come with Pachmayer grips from the favtory... They now come with the standard winewood grips...
This thread is not helping my revolver addiction.
They are the best, once you handle and shoot one will be ruined for anything else.
Not to hijack this thread, but since the topic is Freedom Arms.... I have a 50 round box of 454 Casull brass with an "FA" headstamp. Did they offer their own line of ammo at one time?
I don’t know if it still holds true, but the American Rifleman’s “Dope Bag” gun tests listed the FA .22 LR single action as the most accurate handgun that they had ever tested- until they tested the .357 version with .38 Special wad cutters.
If I ever spring for one, it will be in .41 magnum.
I would want a blued one, though.
Sent from my iPhone using Tapatalk