2 Attachment(s)
Here are a few pics more later...
Pics, Here are a few from the auction... not sure I can post a link due to our site rules and all but here is the item #232662501916, should be easy to find if searching for sold items.
Things I know that are missing for what I need / want to do, De-priming pin, Priming post, primer tube, Needs another wad slide and slide rod, another Wad compression die, Wad tubes, powder and shot tubes ( I think the MEC ones will fit though. Looks like they will have not tried though). I am sure I am missing something else too. Oh and to no surprise it needs a good cleaning it came with plenty of spilled powder on it LOL Action is smooth though.
Attachment 215488 Attachment 215489
.... I am not keeping the bungee cord :-):-):-)
If you guys want any more specific photo's let me know and I will see what I can do. I am going to take some pics myself too so there will be more pics in a few days.
3 Attachment(s)
Here are a few pics from this weekend
Got a few pics before I cleaned it up. It didn't occur to me to get any after LOL
Looking close you can see the missing primer post and nitro wad slide and compression die.
Learned a few rthings. I think this needs some kind of wad fingers to catch the wads after the slide pushes them over to the seater. looks like I will have to figure something out. Also the powder and shot bar are one size. IE does not use inserts for changing things. It does have a screw that slides into the powder to do minor adjusting but the shot is one size. 1-1/8 I believe. I made a dummy shell with nothing in it and the crimps turned out great so thats good.
Well time for the slow crawl on fixing it up.
I will look into the shotshell manual that skeettx suggested too.
Thanks guys!
5 Attachment(s)
Complete? (maybe missing wad weights) 28 Ga
After looking at the parts btw these two, I pulled the primer slide arm off the 12 ga and realized the random pipes I was given were the wad and primer tubes! See pictures. I do not own a 28ga myself. I appear to have a spare 12g wad tube and some spare or additional primer tubes. The last pic shows the original 12g broken spider casting and its platform's wad fingers uh... modifications.
The other 12ga platform has the primer arm, but not the wad fingers. I am unsure if it would be worthwhile to try and remove the die head to move them around.