Printable View
Hello all, well I finally decided on a barrel twist and length for my 45-70 build, I ended up going with a heavy 28" 1:18 / 8 groove Mcgowen with a straight taper. It is coming along and I think I am going to be happy with my choice of barrel. Still needs a lot more work on the stock and finish work on the metal.The target is in 1/2" squares. So what does everyone think so far.
Attachment 202678Attachment 202679Attachment 202683Attachment 202680Attachment 202681
Awesome rifle.
I'm impressed - looks good to me - I'd be proud
Excellent! How long in process?
Nice Work!
rifle looks great..
not trying to be rude or mean but What kind of bullets are you using? At 50m the group should be tighter for a McGowen.
Thanks to all, I have somewhere around 160 hours in the rifle so far. There is still a ton of work to be done if you look closely the stock is still about 2.75" thick and still needs shaping. As for the target it was only to check the scope mounts and to check the adjustments of the scope, the 4 shots on the left were mine starting on the bottom with shot #1 and checking the scope adjustments for what they were doing to poi, the 2 rounds on the left were my son-in-laws, all just to be shooting the rifle and checking the action for functionality other than the proof loads. the whole rifle will have to be disassembled, finish work on the metal and stock done, bluing and stock finish applied. Once that is all done I will start work on load development. Right now I have 3 molds, 2-405 gr and 1-500 gr and have cast and powder coated 20 or so of each to start out with. I will post more pic. as I get more done Thanks again to all.
Wow says it all. I'm very impressed. Well done.
The finished rifle will be a centerfold!
Sent from my SAMSUNG-SM-G930A using Tapatalk
This is very nice. I really like the .45-70...shot a lot of game with it.
Your rifle is a nice piece of work. Beautiful.
re
Nice! Vault Lock No 2........Cool to see:drinks:
Darcy
Thank you, it is nice that someone knows what it is.Quote:
Originally Posted by 45stomp
:) Ohhhhhhhh Myyyyyyyyyy.Now that`s sweet.Thanks for posting.
Good luck.Have fun.Be safe.
Leo
Hey all here is the latest pcture of my second rfle the rifle is complete all that is left to do is do all of the final finshing on the stock and metal, thanks to all who encoraged me in the process.Attachment 206413
I wll post some detailed pictures of all the finish work.
Very pretty
Nice work!
Good evening.
That is a fantastic looking build!!
I keep looking at the work turned in on this forum and I there are a lot of really talented people with an amazing skill set.
Have an awesome week:drinks:
Thank you very much, I am not a profesonal gun builder or machinist, so I only know how to do any of this by what I have seen, read in books and studied the procss of making them and this is only my second rifle build from scratch, I have built 3 pistols (2 muzzle loaders and a .357 mag single shot break open) I think I can do a lot better, and the finished product should show this on the finished firearm.
Nice job. Do you have a name for Her? Something that pretty needs a name my friend.
Not sure yet, But when all the stock finish, steel bluing, engraving and gold enlay that I have planed for it are done, I will then give it a proper name but for now it is just #2.
This is what it will do with Sierra 300 gr HP at 100 yrds this is just with starting load development and getting the scope dialed in, it did almost as well with the Lee 405 HB just a lower poi. It would be better If I was taking my time and trying for grouping.Attachment 206870Quote:
Originally Posted by Mauser 98K
Very,very nice.
Sent from my SAMSUNG-SM-G930A using Tapatalk
A Little more load development. I think I may have found the load, just needs a little more fine tuning. 100 yd 3 rounds
Attachment 207659Attachment 207660
Hats off and respectfull bow.
good work
be well
Thank you, don't know why the targets came out sideways, they were shot with the info box on the bottom. Just fyi.Quote:
Originally Posted by leebuilder
Nice work!
May I ask a newbie guestion? What does this refer to, Vault Lock No 2?
Again looks great!
The vault lock is the design of the rifle action, the 2 is the second design.
It is a very strong action and very cool looking to boot!
Very nice rifle build btw. It is a gorgeous piece of machinery.
Frank De Haas design.Quote:
Originally Posted by Eddie17
Fantastic. I have 2 Chicopees that De Haas designed in process and want to build a vault lock as well. Maybe this will spur me on...maybe.
David
Is that a Leatherwood Malcom scope? It sets that gorgeous rifle off nicely. Good shooting too.
Can I borrow it?
Helo All, Been a while but I finally finished my 45-70, about 260 hours worth in all, I think it turned out well, what do you all think?
Attachment 285864Attachment 285865Attachment 285866Attachment 285867
Good looking rifle , have to ask , what book was your starting point ??
What action is it?
You MADE that gun.
Then you made it beautiful. Very nice.
Sent from my SM-A716U using Tapatalk
:drinks: Outstanding Sir.Thanks for posting.
Good luck.Have fun.Be safe.
Leo
The design came from a Frank De Haas book, I took the design and modified it quite a bit inside.Quote:
Originally Posted by beechbum444
It is a Frank De Haas design an FM Vault Lock No 2.Quote:
Originally Posted by smithnframe
That is a stunning looking rifle ! Great craftsmanship. I planned on making a version of the Chicopee CF rifle but have bought so many project guns to work on that I may never get to it ?
Your work is beautiful !
Jedman