Some of my older Lyman and Ideal handbooks
Attachment 192074 Attachment 192075 Attachment 192076
Printable View
Some of my older Lyman and Ideal handbooks
Attachment 192074 Attachment 192075 Attachment 192076
Some older Speer handbooks
Attachment 192077
Belding & Mull, N.R.A., and Hodgdon
Attachment 192079
Handloader's Digest, and Hornaday
Attachment 192080
Very nice.
I admire your collection of old reloading books and I have collected just a few myself too. But I have a question for you. Which one do you call on most frequently for when you are working up a new load for a rifle you have attained?
None of the above! That task falls to the latest editions from Lyman, Speer, Hornady, and Hodgdon, as well as the online offerings from Hodgon and Alliant. Unless it's something really odd (and I do have a few of those). In those cases, I'm likely to refer to any or all of those pictured (and a number of others that aren't in the pictures), as well as the writings of P. O. Ackley, Earl Narramore, F. C. Ness, Townsend Whelen, Phil Sharpe, and - of course - Ken Waters.Quote:
Originally Posted by DonMountain
Last night I was comparing Speer No. 8 with Speer No. 9 manuals...........
30-30 Winchester 150 grain flat nose.
4895 powder - No. 8 list starting loads @ 34.0 to max 38.0. No. 9 list starting loads @ 27.0 to max 31.0 grains.
4064 powder - No. 8 list starting loads @ 33.0 to max 37.0. No. 9 list starting loads @ 28.0 to max 32.0 grains.
748 powder - No. 8 list starting loads @ 31.0 to max 35.0. No. 9 list starting loads @ 30.5 to 34.5 grains (fairly close).
3031 powder - No. 8 list starting loads @ 30.0 to max 34.0. No. 9 list starting loads @ 24.5 to 28.5 max.
More than a few hand loaders have discovered this. The Speer No. 8 manual is considered a "hot" manual for its listed loads. I have yet to hear of anyone blowing up a gun with the loads from it but I have heard of people who say that some of the top listed loads have made extraction a bit snug. I have a #8 and I never use its top loads but then again, I always start low and slowly work my way up until I get good accuracy or start seeing signs of high pressure. Anyone who starts out using top listed loads in any manual is asking for trouble. my experience anyway, james
Yeah, I know. It just seemed a bit weird that some of the "max" loads in Speer No. 9 are less than the "starting" loads in Speer No. 8.
Attachment 195600The books start piling up after a while.
Quote:
Originally Posted by justingrosche
:bigsmyl2:
I bet one or more of your manuals has data for the old DuPont version of Hi-SKOR, before it was 700x and 800x. If you could point me to Wich one(s), It would help me tremendously
I was shocked to discover that out of all my handbooks and manuals, only the 1966 Handloader's Digest has data for the older Dupont Hi-Skor.Quote:
Originally Posted by wjham77
Max Loads:
Attachment 215110
Data provided by DuPont:
Attachment 215111
The above data is over 50 years old, and is provided with all cautions implied.
Jim
I wish I good get all of these online digitally
Thanks, this is just what I was looking for. If you don't mind, what was the date on the dupont data, I saw some of the online links to 1966 and 1936. The 1966 DuPont data had 700x and 800x, and the 1936 didn't have anything pertaining to hi-skor
The DuPont data came from the 1966 Handloader's Digest, so it's my guess that it actually was published by DuPont in 1965.
Jim
I'm looking for a book with 25 rem 30 rem and 32 rem,can you point me in the right direction?
The Lyman 46th edition has 30 Rem and 32 Rem loading information.
Speer 3 has 30 and 32 Rem
Speer 3,6,7 and Lyman 45
I think I have 2 more somewhere. Probably newer.
http://home.pipeline.com/~shootzn/re...-manuals-1.jpg
jr -every link you posted generates is error message on my computer ...
Is it me or the the link?Quote:
Invalid Attachment specified. If you followed a valid link, please notify the administrator
This topic makes me want to kick myself when the thinking about all the times over the last 46 years of reloading when I gave away older reloading manuals as I bought newer ones.
For I long time I assumed the newer ones just added more information. Live and learn!
Thank goodness for forums like this and the internet (which is only worth it for <1% of what it offers).