would you mind sharing your experience with us?
Quote:
Originally Posted by
runfiverun
you can push the boundary's with cast.
it's just not a matter of making them and sticking them in a case.
you seriously HAVE to make everything fit and work properly.
i can get to over 2700 in my 9 twist ar's and maintain accuracy in the 1-1/2 to
1-3/4 range.
not earth shattering accuracy you say.
thats as good as/better than/ it does with many jaxketed bullets.....
it takes longer than a year to figure some of this stuff out.
how do you achieve that accuracy? What BHN did your bullets have? and which kind of alloy you are using?
I did some testing in my SBR AR with a 12inch barrel, and I've used the Lee 22 Bator mold and accuracy was horrible, at 100 yards I was not able to hit paper. I've used purel lead with 3% antimony and 1% tin water quenched bullets. In reduced loads accuracy is ok, within 50 yards its 1 inch, at arround 12-1300 fps. but beyond that accuracy goes to pot. I would highly appreciate if somebody could teach me some tricks.