Most people ARE NOT baking PC long enough
It seems most people ARE NOT baking PC long enough!!!!
This will cause an incomplete cure which allows gunpowder to affect the PC surface of a bullet and other possible problems.
I've found 2 different bake schedules (which are actually similar with different stages where you start timing the bake cycle
EASTWOOD - Cure Time: 20 Minutes AFTER flowout/the PC melts
PBTP, CARDINAL - 10 minutes AFTER the boolits reach 400°
https://www.powderbuythepound.com/su...wet-black.html
• Cure Schedule = 400f/10 Min at Part Metal Temperature
http://www.cardinalpaint.com/assets/...9-T013-TDS.pdf
Cardinal paint CURE SCHEDULE: (METAL TEMPERATURE) 10 MINUTES @ 400 DEGREES F.
I guess the time is relevant to how/when you start gauging it
https://www.eastwood.com/hotcoat-pow...ight-blue.html
SPECIFICATIONS
Color: Ford Light Blue
Gloss Level: Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout