HFPC Boolits..Piglet Method
I started reading another thread about various methods and coating materials and chose the Harbor Freight Powder Coat and acetone Method.
I have compared this method of coating against the Hi Tech coating & Copper Plated.
http://imageshack.us/a/img819/5666/p6060449.jpg
http://imageshack.us/a/img856/6084/p6060452.jpg
http://imageshack.us/a/img341/93/p6060451.jpg
http://imageshack.us/a/img4/1840/p6060445.jpg
My test results are nowhere near finished but in this lovely dry climate the Hi Tech dries up and flakes off when tested with a hammer. To be fair these bullets have been in my possession for exactly 2 months.
My HFPC bullets smashed with a hammer showed far less surface distortion and zero flaking. I will test them again when my HFPC boolits turn 2 months old.
http://imageshack.us/a/img560/4555/p6060447.jpg
http://imageshack.us/a/img197/1175/p6060448.JPG
PLEASE KEEP THIS ABOUT THE PIGLET METHOD