C'mon addicts...fess up! Reloading presses, including hand presses to progressives. NOT including Lee loaders or lubrisizers.
Printable View
C'mon addicts...fess up! Reloading presses, including hand presses to progressives. NOT including Lee loaders or lubrisizers.
Twelve if you count my two little Piggy's!
5 dillons
2 rcbs single stage
1 rock chucker that is 30 years old..still going strong.
1 Dillon 550B that is over 20 years old..no problems.
Don't need any more.
Mr. Ed
I own four. I only have 2 on my bench. I use a Redding T 7 for all single stage loading and a Dillon 550 for progressive loading.
A Lee Challenger and RCBS Rockchucker are in the room somewhere collecting dust.
I don't see a need for more than 2 on my bench.
Only one goes up at a time
Co-ax
Lee 3 hole Turret
Lee C press
RCBS RS2
Huntington hand press
- 2 Dillons
RL-300
RL-450
Buchanan Precision Machine Hand Press #001
Had and gave away RCBS Jr and CH 444
Jezz now you guys are putting up shotgun presses
Mec for 12
Lee for 20
Gave my old Lee 12 away
3 lube sizers
Star
RCBS 1st model
Lyman 450
A bunch of Lee Loaders, and two hand presses, and a Load All. Going to add a bench mounted press, Classic Cast or Classic Turret
I have 14 here right now. 5 1050's, 550, 650, 2 SD's, 2 366's, a turret, 600 jr and a Lachmiller L1000
6.
Dillon 450, Lee Loadmaster, Star, and 3 single stage presses.
9.
Dillon 450, Lee Loadmaster, Star, and 3 single stage presses.
Oops, forgot the 3 shotgun presses.
AT my house right now, I have a Lee Chananger. I also have a RCBS RS3, and a Lee classic Turret, but they are out of state.
Two Dillons, a SDB and a 650. And my trusty old Lyman Spar-T, I bought used over 40 years ago. Still used frequently.
RCBS rock chucker
RCBS rock chucker jr
LEE hand press
Two LEE load alls 12 and 20ga
One Dillon 550, one Lee classic, and a Texan shotgun press.
Dillon is permanently mounted, while the other two are mounted on plates that slide into my bench.
I am down to 9.
Hollywood Senior
Texan 3 holer
2 - Texan Turret
Dunbar
Redding
Fuller
2 - Red Heads
I have 4 presses. A Dillon 550, Dillon 450, RCBS Rock Chucker & an old RCBS press. I use them all for one thing or another.
I can weigh in at 16 metallics from the two RL 1000s, 3 Stars, 4 1050s down the line to my first press, a Pacific super C, and 14 assorted
MECs from the big hydralic to the first Texan I started loading with. I'm a sick one alright. lubersizers, 4 Stars and the usual batch of Lymans.
4 Lees, 1 Lyman
Lee 3 hole turret, classic, c style, and hand press
Lyman spartan
9 ...that's it, just 9
and about as many lubsizers...but you didn't ask that :P
I just have two right now. A Lee breech lock challenger and an original RCBS rock chucker. I hope to add more.