Originally Posted by
Ausglock
Moonman.
Try leaving your temp at 380F but increase your time to 12 minutes.
I find that a stable temp is better and play with time.
Remember, each coating has different insulation properties and may need a longer time to get the alloy to temp to allow bonding of the coating.
I have to do this with the reds.
I tried a few new blue coatings on the weekend, but they all failed to remain blue.
Back to the drawing board for Joe.
There is one new coating that is showing promise for a bright lime green Zombie green. Joe has to tweak the formula a bit.
I hope Santa is kind to you lot and brings you heaps of presents in the form of bullet molds, coating etc etc etc.