No photos, but I fished it out of the water with a stick to get a positive ID on species. That was the "beta" version, just exactly equal parts by weight fresh Ivory, Assemblee Goo, and Randyrat's beeswax. Had the .45 Colt loaded up with SL-61.0 and it continues to dazzle and amaze with zero oily residue anywhere on the gun, no soot, no smoke when shooting, and pinpoint accuracy. In fact it's as clean in a revolver as jacketed bullets, actually cleaner due to no powder residue forming on anything, either. This is the first lube base other than Starmetal lube I've seen that will handle popgun loads as well as 2100 fps with the same bore results.
I'm pondering making another batch with slightly less transmission assembly lube and some Dexron III to make up the lost "softness". Unlike Starmetal lube, it takes more softening agent due to using beeswax instead of the wax he uses, so it still needs to be about a full third by weight of the middle modifier + oil combination to turn out soft enough to run through a sizer or finger lube at room temperature.
Gear