A simple sturdy way to attach to wall is leave a 3” overhang on the bench top push against the wall , screw a 2x4 to the wall pushed up against the bottom of the top screw through the bench top into the 2x4 with countersunk screws.
Printable View
Another idea is to screw a 1X2 on edge an inch or so in from the. Back of the bench full width to keep stuff from rolling off the back and to give you a place to stick wires crossing the bench.
Attachment 242086
I actually use coupling nuts on those studs, they provide another threaded hole to screw other stuff into, like a mirror or light stand.
I do use roundish quick knobs to secure the presses on the shelf in storage/not in use.
I use those plates because I can buy them cheap, already to size and with holes already drilled.
:mrgreen:
I never thought this would turn into this great a topic! There are some really fantastic ideas submitted here and it's got to be inspiring someone somewhere!
When I started thinking about my mount to the bench I looked at a lot of different ideas and solutions from all the different forum posts. I also looked at the Lee mount and the In-Line Flush Mount system. Both had ideas I liked and didn't like. The Lee just didn't look solid enough from many of the videos I watched where they were being used and the In-Line I didn't like the way it protruded beyond the edge of the bench.
Now I still need to either find a good countersink tool or I need to take the plate off the bench and send it to my friend the machinist to countersink the holes that hold the plate in place. Right now I have pan head machine screws in place and they would be much nicer if they too were flush with the plate.
I have the lee system and it is very rigid but ultimately depends on your bench , mine is on the Lee stand so my bench stays clear. All. Of it is plenty stiff for what I reload 7-08 , 356 Win. , 30-06 45–70 are the largest I load 95% is pistol stuff. The only thing I don’t like on the Lee mount is the four phillips screws that clamp the plate to the base I need to replace with Allen screws.
And it is far from flush the base pate would stick up a least 1//2” with nothing on it.
@kmw1954
I was concerned about taking over/drifting your thread, it's good to know you approve [smilie=l:
I want to add that when I adopted that plate to different/new presses I had to weld on some width to have something under the press bolt holes, with the Loadmaster being the worst because those holes are right on the front edge [smilie=b:
Attachment 242126
So my system is not without it's faults, and I cut the edge further back and welded on a wider piece so I wouldn't need to drill holes thru the welds.
For a Pro1000 I used coupling nuts as risers so I could put a primer catch container under the press, negating the need of a hole thru the bench for the primers to fall thru:
Attachment 242127
You can see I welded on some tabs for the Pro1000 too, and drilling thru the welds chewed up a few drills, an experience not to be repeated on the plate for the Loadmaster.
Latest press on the bench being "built" from gun show stuff, RC/piggyback/etc, a good view of the coupling nuts:
Attachment 242129
Presses stored on a shelf, dust covers removed:
Attachment 242128
My loading "room" is a closet under some stairs so I have the same bolt pattern on my work bench so I have some walk-around room when working on a press.
Adapting a Lee Bullet Feeder for bullet sizing here on the work bench:
Attachment 242130
pics save a lot of words...
Sorry for the continuing/hijack/drift,
:mrgreen:
Keystone those coupling nuts make a nice easy to do riser for a press with 3or4 mounting bolts Thanks for the pics.
RP, I see we don't live too far from each other. I have sometimes felt like the odd ball because of my shooting to reload hobby. Its good to know there are others in the area with a common "affliction". I'm down to just 5 presses now. I have gifted 4 or 5 to younger folks just starting out.
OP, love this thread, its always fascinating to see all the different ideas people come up with to mount multiple presses and store the ones not in use.
My space is small now but I still use 3 different benches at different heights so I can get comfortable with different machines. All 3 benches in use now are old and have been modified over time. I included some pics of the last modification, adding two layers of 3/4 ply with the socket plate cuts to a bench first built in 1982. It won't the first one but its the oldest one to survive my moves and ex wife etc. This method is fairly cheap and and is very sturdy. Decent plywood, glue and decking screws can make for a stiff wobble free bench. I could see this method working on a old sturdy desk? I may end up having to change everything around to load sitting as I have more spine and now a hip problems. Getting old sucks.
ETA, my wood working skills are zero as you can see but I don't let that hold me back.:p
Mine is a commercial steel work bench (built in overhead flour. light) with a solid laminated top covered with soft flooring material. It was FREE! And delivered FREE!
One of the handiest things I did was completely by mistake...
See the Lee press above with the bolts up with nuts on top?
I moved my press from a thicker top and the bolts were 'Too Long',
Right up until the time I realized the case holders would slip over the bolts sticking up through the nuts on top.
Since I do about the same caliber over & over, I kept the 3 case holders I used the most on the bolts.
My case holders for the die sets stay with the die sets so I don't get tolerance changes when I'm loading,
BUT,
That press also was my tool press, universal decapper, bullet puller, swager (lousy, slow swager) etc,
2 second tool head change for common tooling, with the case holders right there for what ever gave me problems.
It's even better when paired with the self indexing progressive press as a tool press, no 'Mystery' cases/rounds on the bench since in 5 seconds I can set up to fix any problem or tear down any suspect rounds and recover components.
Just for the record, fine threads (SAE) work the best for case holders, something else I leaned completely by accident, fine thread was handy when I was mounting the press.