5 Attachment(s)
Photos of my case forming dies
Here are photos of my case forming dies.
The following views are of my dies for reducing .25ACP and similar body diameters down to .22 Ladybug body diameters:
Attachment 222496
Top and side view of dies (tops tapped 1/2-20UNF)
Attachment 222497
Bottom view of the homemade dies with the Left ones fitted with Drill Bushings and the rightmost one a machined blank body.
Also shown are a machined Blank die body ready for a Drill Bushing insertion and the 8" long 3/16" diameter Pin Punch I use to remove swaged cases form the dies. The punch working end had been modified with a slight taper and radius on the edge.
The following views are of my dies for forming 5.7x28mm and .22 Hornet down to .25ACP body diameters:
Attachment 222499
Attachment 222500
These dies are, from the Left, Lee opened Carbide Ring .25ACP Sizing Dies of .300", .288", .284", and .2785"; with the rightmost die a Hollywood Engineering Steel .25ACP sizing die.
Chev. William