GCd some 145gr and PCing for BO.
Printable View
GCd some 145gr and PCing for BO.
Actually on the back deck last night. Annealed some old 8x56R brass.
loaded up some ILSA 44 mag 220 gr LSWC over 5.4 of trailboss. Also loaded some 38 special and sized and lubed some 44 mag boolits
I'm not a fan of putting on gas checks at all. I make the exception for my deer rifle only. It's an AR platform, which can be picky about what will reliably feed. These are the Lee C309-170-F. (Everything else I own wants to be fed from a $100+ mold from the other side of the planet.) They never fail to feed. They go where I say. And they expand to 3/4". I don't really play with it much. So, it's worth the extra time & effort. I just cast a handful or two, from time to time, when I'm making a pile of something else. This little batch is already more than I like to deal with. I do cheat a little bit. I set my 300BLK seater to the bullet length and push the checks on with the stem from the push through sizer. After that, they go through the sizer backwards. Gets them square on every time.
https://i.imgur.com/6dgMJlJ.jpeg
Put your reading glasses on.Lol!
Last night I finished trimming and chaffering all of my new and used 308 win. brass. It's all in freezer bags and ammo cans, ready to be loaded.
I'm starting 6mm Remington this evening.
I still have quite a few new 6mm brass that needs to be sized, trimmed, and chaffered. I also have quite a bit of once fired 6mm Remington brass that will also need to be sized and trimmed.
Loaded 25 Activ 12 gauge shells with 1 1/8 ounce of shot and International powder. Wasted a 1 gallon milk jug on the test shot.
Used up the last of my Re22 to load some 140 gr JSP for my 7x57 Mauser. I ended up with 25 rounds and a small amount of powder which I lit and watched it burn.
Yep, Re22 is slow burning…….
Sent from my iPhone using Tapatalk
I'm making 38 Special target loads.https://uploads.tapatalk-cdn.com/202...535016460e.jpghttps://uploads.tapatalk-cdn.com/202...36cb77e267.jpg
Had a breakthrough in my development of rice wasp shot loads and snake shot loads using cheap gelatin medicine capsules. Finally got the process nailed down
Attachment 326981
Even in the 9mm it destroys them. Here's one getting blasted.
https://youtube.com/shorts/Jtt6SlpTrQw?feature=shared
Loaded 250 .357 Maxi's for this weekend.
How far away can you shoot at a piece of paper to where it won't break it? I'm curious how far it carries retained energy, you are the first one I've seen make anti insect ammunition with rice. I'm impressed at how effectively your hand load obliterated the wasp without causing more than the very slightest of injuries to the painted surface. It looked like he got struck by a meteor :-)
At ~4ft it knocks them down but doesn't shred them. The last wasp I hit at 3ft had its guts hanging out. 2ft is sublime. Keep in mind that shot was early in the load development before the gel capsules and only 1/2 the rice payload the capsules will hold. That load was capped with melted wax and it is possible that the wax cap is what hit that wasp.
Thread: https://castboolits.gunloads.com/sho...-Loads-38-45LC
Switched to gelatin capsules here: https://castboolits.gunloads.com/sho...-38-45LC/page6
The .38 capsule load is brutal
https://i.imgur.com/u4JMUCH.jpg