Just loaded 100 .32SW long with the Lee .314 90 gr TC tumble lubed bullet over 2 grains of Red Dot.
Today the second hundred got primers, and more bullets cast.
Tommorow I load the second hundred.
I'm missing the cap on mine so it wears a coke can with the top cut off. Just cause.
http://basspro.scene7.com/is/image/B...92_10207301_is
I'm using a 30 year old RCBS uniflow powder measure with the small cylinder. I checked loads all through the first batch and every load I checked was right on 2 grains. Not above or below.
But I am a little fussy about doing it exactly the same way every time.
Handle goes up, knocks twice, handle comes down knocks twice.
Brass starts primer up, gets charged and put into a different block primer down. Loads verified with flashlight before loading. Yes I watch for double charges like a hawk.