Originally Posted by
Jim_Fleming
Thor, you just gave me an idea...
What about using a SECOND jacket tray, drilled to match the first jacket tray. Then when I load all the cores, swage them, etc.
Then I use the core tray as the alignment, set the second jacket tray, lined up of course, set it down over the core tray, _face down _, holding all three trays together, then flip everything over together. Exactly like a primer flipping tray works...
What would have to happen is the core tray would have to used as a template then drill the other trays from it.
Or am I making this to complicated?
Jim
Sent from my Droid