I have posted a new copy of download files. Here are are a few of the changes:
- Removed body for JGY motor, as the motor is just not powerful enough for the larger body so no sense in having it.
- Modified all of the drop tubes to have a more gradual slant in the top where the bullet feeds for more reliable feeding
- Added a drop tube --> DAA feeder die spacer to add height to drop tube which I found was helpful in adjusting where the bullets sit in relation to the light sensor, depending on the caliber.
- Added an extra large spring adapter that works with the spring from the DAA Output Chute. I used this larger diameter spring to reliably feed 45 cases.
https://www.doublealpha.biz/us/doubl...ute-and-spring
- Also added some length to the extra large spring adapter so the feed to the spring was more gradual to reduce issues where bullet/cases would catch on spring. I may make this modification to the other spring adapters as well.
- 45 ACP nose down brass collator plate now has the built in pivots.
Now that I have 45acp bullets and brass feeding flawlessly, I am going to move my attention to 9mm. Once I complete that process I will post additional files. My plan is to have dedicated flipper plates for each caliber to match the collator plate, so I don't have to mess with set screws to get the spacing correct.
https://drive.google.com/drive/folde...vV?usp=sharing