WRA 69 Brass got loaded again. Son dug out old hunting licenses.
Printable View
WRA 69 Brass got loaded again. Son dug out old hunting licenses.
Loaded up a couple hundred rounds of 9MM 135 GR TC training ammo
Still reading, researching and acquiring equipment to get into casting my own boolits some day soon.
The time has arrived to put a scope on my H&R Topper 44WCF. Drilled and tapped it for a #62 Weaver base. A simple Bushnell 4x Sportview will suffice, I think.
And trying to round up .40 S&W ammo makings....
Sent from my SM-A716U using Tapatalk
Picked up a nice set of Krag dies from HawkeyeEarl. Very smooth transaction. Filled my scrub tub with hot water an dawn. Broke them all down and used my tube brushes to make them shine. Then into the oven at 200° for 40 minutes to thoroughly dry, then lightly oiled an now their ready to go.
https://i.postimg.cc/fRL7mCDH/20211127-104318-HDR-1.jpg
https://i.postimg.cc/cLs9jfZY/20211127-104634-1.jpg
https://i.postimg.cc/bw2pBXR4/20211127-121423-1.jpg
I looked at it and decided for the hundredth time I needed to do some straightening up.
Cast up about 10lb of lee TL356-124-2R mold is ancient and loose but still cast good boolits right from my first pour (wired I know) also did some tidying up in the room
Attachment 292368
Attachment 292369
Sorting the range buckets by hand - need to find a way to speed it up
prepped 50 45-70 cases ,sized, trimmed ,and expanded.found a 100 350gn boolits i had forgotten about.
Started what will be a long winter project of rebuilding my 57 year old reloading bench. I am going to tear it apart and completely rebuild it. james
Prepped about 50 cases for 45-70. Need to finish those today and prep the bench for load work up on 9mm boolits I purchased from a guy here last year.
Sent from my iPhone using Tapatalk
Loaded 50 light loaded .38 special rounds. My wife has arthritis in her hands so normal loads HURT.
Yeah, me too. Looked for my reloading bench today, couldn’t find it.
Brass or boolits recovered from the range? There are sorters that work fairly well and aren’t too pricey for the first. Hand sorting hardcast from jacketed is the only option I know for the second.
Cast 461 lee 358-95FP for .380 and powder coated and sized to .357 with lee push through sizer. Also loaded 100 .380.
Working on some loads for the 44 Shotgun. Looking forward to eliminating some pigeons from the feedlot in the morning!https://uploads.tapatalk-cdn.com/202...14b11ff24a.jpg
Sent from my Pixel 5 using Tapatalk
Scored this today at my L.G.S today
Attachment 292543
Attachment 292544
Got it for $30 CND $23.40us
Don’t know much about it, but the price was right so I grabbed it. it’s the third single stage I got, so going to place it between my lee classic cast and, RCBS rock chucker. Should be a nice addition
They're loads for a Steven's chambered in 44 Shot. The top of the cases show clear glue over an overshot card (#12 and #7 shot mixed). Made from Starline 5 in 1 brass.https://uploads.tapatalk-cdn.com/202...242ff76f52.jpghttps://uploads.tapatalk-cdn.com/202...751cb31086.jpghttps://uploads.tapatalk-cdn.com/202...1dc5633547.jpg
Sent from my Pixel 5 using Tapatalk
Loading a hundred or so .40 S&W with Bullseye and 180gr TCPC to feed the new Shield.
Sent from my SM-A716U using Tapatalk
My load benches have always been a work in progress. From adding shelf / storage space, to jockeying the stuff on them to max out usability. I guess loading too many calibers doesn't help much :-)
The last month I've been casting and PC'ing for and loading .40's, 10's, .357 Sig, .38 Super, and 9x25's, and I am adding some high up storage for less used stuff.
Attachment 292684
Attachment 292685
loaded about 30 45-70 shells, lubed about 60 or so Lee 45-405hb bullets.