I FOUND SOME OF THE TESTS!!!!!!!!!!
I was cleaning up the office with my wife today, and I found a pile of papers that slid off the back of my desk and low and behold, one of those papers was some of the tests.
There are six results here, three of them are from the alloy that I was developing, (we dont care about that because it doesn't exist in that form any more) but the top three were some WW that I had tested.
Sample #1:
Pb= 98.74%
Sb=.16%
Ni=.23%
Col=.35%
Au=.52%
Sample #2
Pb=98.97%
Sb=.34%
Ni=.21%
Cd=.15%
Au=.33%
Sample #3
Pb=97.94%
SB=1.10%
Ni=.30%
Au=.60%
Ga= .07%
These were some of the worst ones. Most of the ones I tested had about 1.5% antimony but these were extremely low. Some had almost 2% antimony, so I averaged them all together to get about 1.5% antimony give or take. I say again, that none of the samples I tested had even a trace of Tin in their makeup.
But, I have an overabundance of tin available to me at all times so I geuss you could say that I couldn't CARE-LESS what % tin the alloys have.;-)