Sized decapped 250 .44Mag cases. Brokedown 21 .44Mag Cowboy Loads with an impact hammer. Only 129 rounds left to go.
Printable View
Sized decapped 250 .44Mag cases. Brokedown 21 .44Mag Cowboy Loads with an impact hammer. Only 129 rounds left to go.
PC'd the last 700 boolits I had cast. My young grandson is coming here tonight so I can put him to work sizing them.
Attachment 276117
Attachment 276118
Attachment 276119
Attachment 276120
Started setting up my Lee APP
Attachment 276124
Very beautiful powder coat. If I would have had that success I'd have kept doing it. Love your works of art.
Thanks for the report , I need to get some cast and try them out.
My helper had a break from home schooling so he helped Papa size a few hundred boolits.
Attachment 276197
I put my new Redding solid carbide primer pocket uniformer tool to work cutting pockets to depth on 100 once-fired W-W 7.62 x 54R cases. They miked 0.119" deep when received. Chore, chore, chore........
180gr SST
Sent from my SM-G988U using Tapatalk
Cast about 550-600 Accurate 40-180 BG boolits.
Yesterday I finally forced myself to clean my reloading area up in the basement. Went to vacuum the cobwebs and found 2 boxes of Winchester LPP and SPP in the rafters. Don't remember putting them there but they have been there awhile, $19.99 a thousand. Need to clean more often!
I tumbled some 32 Shorts and Longs Jim Sent me!!
CW
I just loaded a dozen .303 British using bullets pulled from some old nasty SF head stamp 7.65 Mauser and some Lee TL 314 90 SWC. Improviser that I am, I used 7.7 Jap dies to neck size and decap the PPU .303 brass. For the jacketed bullets, I used a starting load of 1970s vintage Win 760 sparked by the same vintage Remington 9-1/2 M primers. The cast loads were 9 grs of Unique and I had to seat those short little fellas with a .308 Win seating die.
In the background, Hank Jr. was singing “ Country boy can survive”......
Loaded up some test loads for the 44 Gamegetter with some homemade #9(ish) shot.
Sent from my Pixel 5 using Tapatalk
Loaded 100 Hornady 230gr XTP over 7.5gr Alliant BE-86.
Cast some 45 230gr and swapped LPP for SPP with Ryan from the forum - nice meeting :)
Pump'n that handle Boss. Down and up....
Finished the taper crimp on all them .223s.