I cleaned it up and put ever6thing back in its place.
Printable View
I cleaned it up and put ever6thing back in its place.
About ten years of infrequent use. Mostly hit on wood but sometimes concrete. I’ve finally learned to load 5 cartridges and try them before proceeding with the batch!
Not much of anything lately. Been involved with hunting season and probably will be until years end. I do have stuff saved up to do and as soon as it warms up I'll be casting.
Batch of 45/70’s left tumbling this AM! Aughta be sparklin by 18:00!
CW
Not 100% sure where to put this, so I figure this thread is as good as any... Here is what I did in my reloading room last night...
From this:
Attachment 253176
Attachment 253178
To this:
Attachment 253179
Attachment 253180
Attachment 253181
Attachment 253177
Mine needs some major house keeping done. I wanted to remodel it when we redid the kitchen but it didn't happen. I'll jump on it after hunting season is over.
My Dad is coming to town for Christmas and said he wants to go to the shooting range... He taught me to shoot when I was about 10 by going out to the desert and shooting 22s and 38s. (This was 30-somthin years ago)
In my adult life, I've never been to the range with my Dad and he said he wanted to go. So, I have a thing I like to do when I explain why I really enjoy reloading and it is to take three 44 magnum loads: Trailboss, Unique and W296 and have them shoot one of each in that order.
So, went to my ammo bin and Unique - check, W296 - check.... I've got NO trailboss loads!!! So, loaded up about 50 44 mag with Trailboss. Should be a fun time.
I resized 6 45-70 300gr HP bullets to 452 then I loaded up 6 rounds. 39, 40 and 41gr of Hodgdon H4198. I made a dummy round and fed it through my AR-15 and it seemed to work well enough. At some point I'll end up with a mold to try but in the mean time these cost me under .10 each. Expecting some stout results from these in my AR pistol as I've been shooting 265gr. Maybe I should upgrade to something a little gentler shooting than an A2 grip and add a muzzle brake.
Attachment 253214
I loaded up a dummy 350 W/ a Saeco 180g bullet.
Gonna squeeze some More down to 356 and send’em down range!
CW
Signed up for a free ingot mold giveaway contest here on the forum.
Giveaway - 2 Free Ingot Molds - Winner chooses CB or Redneck Gold
https://r.tapatalk.com/shareLink/top...ink_source=app
made up some gas checked 158gr lswc hp using a lee single cavity mold.
Attachment 253448
Finishing up an AR-15 so I can move on to the next project and there's always a next project.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Attachment 253456Gas checked couple hundred 323470 boolits. Now for powdercoating
Powder coated, sized, installed gas checks on 243 .30 cal. boolits. 155 grain Lee spire point, sized to .310”. .308 Win. Here we come!
neck turned 40 243 winchester cases, ain't sure it's really necessary but it sure is tedious
Polished 200+ 223's, then full length sized them, then back in the polisher to take off the lube.
Been runnin' brass in the wet tumbler for the past couple of days. Of course that required decapping it all before it went in with the pins.
Man!! is that stuff purty!!Attachment 253509